[PATCHv2 1/3] ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager.

[soren.brinkmann@xilinx.com (Sören Brinkmann)]

On Sun, 2015-10-18 at 12:51PM -0500, Josh Cartwright wrote:
> On Fri, Oct 16, 2015 at 03:42:28PM -0700, Moritz Fischer wrote:
> > Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
> > ---
> > 
> > v2:
> >  - Clock names are now a required property
> >  - Removed interrupt-parent property
> > 
> > ---
> >  .../devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt | 19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt
> > new file mode 100644
> > index 0000000..7018aa8
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt
> > @@ -0,0 +1,19 @@
> > +Xilinx Zynq FPGA Manager
> > +
> > +Required properties:
> > +- compatible:		should contain "xlnx,zynq-devcfg-1.0"
> > +- reg:			base address and size for memory mapped io
> > +- interrupts:		interrupt for the FPGA manager device

If we are that picky, this is technically an interrupt specifier :)

> > +- clocks:		phandle for clocks required operation
> 
> Technically a "clock specifier", but other than that:
> 
> Reviewed-by: Josh Cartwright <joshc@ni.com>
Reviewed-by: S?ren Brinkmann <soren.brinkmann@xilinx.com>

	S?ren