linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mturquette@baylibre.com (Michael Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 1/2] clk: imx6: Add SPDIF_GCLK clock in clock tree
Date: Mon, 19 Oct 2015 08:28:07 -0700	[thread overview]
Message-ID: <20151019152807.20687.15779@quantum> (raw)
In-Reply-To: <ee897786f33c9ba67b560964a76485891f2f63a8.1444471684.git.shengjiu.wang@freescale.com>

Quoting Shengjiu Wang (2015-10-10 03:15:06)
> Correct SPDIF clock setting issue in clock tree, the SPDIF_GCLK is also
> one clock of SPDIF, which is missed before.
> 
> We found an issue that imx can't enter low power mode with spdif
> if IMX6x_CLK_SPDIF is used as the core clock of spdif. Because
> spdif driver will register IMX6x_CLK_SPDIF clock to regmap, regmap will do
> clk_prepare in init function, then IMX6x_CLK_SPDIF clock is prepared in probe,
> so its parent clock (PLL clock) is prepared, the prepare operation of
> PLL clock is to enable the clock. But I.MX needs all PLL clock is disabled,
> then it can enter low power mode.
> 
> So we can't use IMX6x_CLK_SPDIF as the core clock of spdif, the correct spdif
> core clock is SPDIF_GCLK, which share same gate bit with IMX6x_CLK_SPDIF clock.
> SPDIF_GCLK's parent clock is ipg clock.

I'm confused by this. Is there really a new clock signal to be added, or
this just to workaround some reference counting problems with regmap?

> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>

Please Cc the linux-clk at vger.kernel.org mailing list for future clock
driver patches.

Regards,
Mike

> ---
>  drivers/clk/imx/clk-imx6q.c               | 4 +++-
>  drivers/clk/imx/clk-imx6sl.c              | 4 +++-
>  drivers/clk/imx/clk-imx6sx.c              | 1 +
>  include/dt-bindings/clock/imx6qdl-clock.h | 3 ++-
>  include/dt-bindings/clock/imx6sl-clock.h  | 3 ++-
>  include/dt-bindings/clock/imx6sx-clock.h  | 3 ++-
>  6 files changed, 13 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
> index e9ba018..c193508 100644
> --- a/drivers/clk/imx/clk-imx6q.c
> +++ b/drivers/clk/imx/clk-imx6q.c
> @@ -119,6 +119,7 @@ static unsigned int share_count_ssi1;
>  static unsigned int share_count_ssi2;
>  static unsigned int share_count_ssi3;
>  static unsigned int share_count_mipi_core_cfg;
> +static unsigned int share_count_spdif;
>  
>  static inline int clk_on_imx6q(void)
>  {
> @@ -462,7 +463,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>         clk[IMX6QDL_CLK_SATA]         = imx_clk_gate2("sata",          "ahb",               base + 0x7c, 4);
>         clk[IMX6QDL_CLK_SDMA]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
>         clk[IMX6QDL_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
> -       clk[IMX6QDL_CLK_SPDIF]        = imx_clk_gate2("spdif",         "spdif_podf",        base + 0x7c, 14);
> +       clk[IMX6QDL_CLK_SPDIF]        = imx_clk_gate2_shared("spdif",     "spdif_podf",     base + 0x7c, 14, &share_count_spdif);
> +       clk[IMX6QDL_CLK_SPDIF_GCLK]   = imx_clk_gate2_shared("spdif_gclk", "ipg",           base + 0x7c, 14, &share_count_spdif);
>         clk[IMX6QDL_CLK_SSI1_IPG]     = imx_clk_gate2_shared("ssi1_ipg",      "ipg",        base + 0x7c, 18, &share_count_ssi1);
>         clk[IMX6QDL_CLK_SSI2_IPG]     = imx_clk_gate2_shared("ssi2_ipg",      "ipg",        base + 0x7c, 20, &share_count_ssi2);
>         clk[IMX6QDL_CLK_SSI3_IPG]     = imx_clk_gate2_shared("ssi3_ipg",      "ipg",        base + 0x7c, 22, &share_count_ssi3);
> diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c
> index 3c3333f..1be6230 100644
> --- a/drivers/clk/imx/clk-imx6sl.c
> +++ b/drivers/clk/imx/clk-imx6sl.c
> @@ -97,6 +97,7 @@ static struct clk_div_table video_div_table[] = {
>  static unsigned int share_count_ssi1;
>  static unsigned int share_count_ssi2;
>  static unsigned int share_count_ssi3;
> +static unsigned int share_count_spdif;
>  
>  static struct clk *clks[IMX6SL_CLK_END];
>  static struct clk_onecell_data clk_data;
> @@ -397,7 +398,8 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
>         clks[IMX6SL_CLK_PWM4]         = imx_clk_gate2("pwm4",         "perclk",            base + 0x78, 22);
>         clks[IMX6SL_CLK_SDMA]         = imx_clk_gate2("sdma",         "ipg",               base + 0x7c, 6);
>         clks[IMX6SL_CLK_SPBA]         = imx_clk_gate2("spba",         "ipg",               base + 0x7c, 12);
> -       clks[IMX6SL_CLK_SPDIF]        = imx_clk_gate2("spdif",        "spdif0_podf",       base + 0x7c, 14);
> +       clks[IMX6SL_CLK_SPDIF]        = imx_clk_gate2_shared("spdif",     "spdif0_podf",   base + 0x7c, 14, &share_count_spdif);
> +       clks[IMX6SL_CLK_SPDIF_GCLK]   = imx_clk_gate2_shared("spdif_gclk",  "ipg",         base + 0x7c, 14, &share_count_spdif);
>         clks[IMX6SL_CLK_SSI1_IPG]     = imx_clk_gate2_shared("ssi1_ipg",     "ipg",        base + 0x7c, 18, &share_count_ssi1);
>         clks[IMX6SL_CLK_SSI2_IPG]     = imx_clk_gate2_shared("ssi2_ipg",     "ipg",        base + 0x7c, 20, &share_count_ssi2);
>         clks[IMX6SL_CLK_SSI3_IPG]     = imx_clk_gate2_shared("ssi3_ipg",     "ipg",        base + 0x7c, 22, &share_count_ssi3);
> diff --git a/drivers/clk/imx/clk-imx6sx.c b/drivers/clk/imx/clk-imx6sx.c
> index f0ad8bb..fea125e 100644
> --- a/drivers/clk/imx/clk-imx6sx.c
> +++ b/drivers/clk/imx/clk-imx6sx.c
> @@ -460,6 +460,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
>         clks[IMX6SX_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
>         clks[IMX6SX_CLK_AUDIO]        = imx_clk_gate2_shared("audio",  "audio_podf",        base + 0x7c, 14, &share_count_audio);
>         clks[IMX6SX_CLK_SPDIF]        = imx_clk_gate2_shared("spdif",  "spdif_podf",        base + 0x7c, 14, &share_count_audio);
> +       clks[IMX6SX_CLK_SPDIF_GCLK]   = imx_clk_gate2_shared("spdif_gclk",    "ipg",        base + 0x7c, 14, &share_count_audio);
>         clks[IMX6SX_CLK_SSI1_IPG]     = imx_clk_gate2_shared("ssi1_ipg",      "ipg",        base + 0x7c, 18, &share_count_ssi1);
>         clks[IMX6SX_CLK_SSI2_IPG]     = imx_clk_gate2_shared("ssi2_ipg",      "ipg",        base + 0x7c, 20, &share_count_ssi2);
>         clks[IMX6SX_CLK_SSI3_IPG]     = imx_clk_gate2_shared("ssi3_ipg",      "ipg",        base + 0x7c, 22, &share_count_ssi3);
> diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
> index 8de173f..77985cc 100644
> --- a/include/dt-bindings/clock/imx6qdl-clock.h
> +++ b/include/dt-bindings/clock/imx6qdl-clock.h
> @@ -254,6 +254,7 @@
>  #define IMX6QDL_CLK_CAAM_MEM                   241
>  #define IMX6QDL_CLK_CAAM_ACLK                  242
>  #define IMX6QDL_CLK_CAAM_IPG                   243
> -#define IMX6QDL_CLK_END                                244
> +#define IMX6QDL_CLK_SPDIF_GCLK                 244
> +#define IMX6QDL_CLK_END                                245
>  
>  #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
> diff --git a/include/dt-bindings/clock/imx6sl-clock.h b/include/dt-bindings/clock/imx6sl-clock.h
> index 9ce4e42..e14573e 100644
> --- a/include/dt-bindings/clock/imx6sl-clock.h
> +++ b/include/dt-bindings/clock/imx6sl-clock.h
> @@ -174,6 +174,7 @@
>  #define IMX6SL_CLK_SSI1_IPG            161
>  #define IMX6SL_CLK_SSI2_IPG            162
>  #define IMX6SL_CLK_SSI3_IPG            163
> -#define IMX6SL_CLK_END                 164
> +#define IMX6SL_CLK_SPDIF_GCLK          164
> +#define IMX6SL_CLK_END                 165
>  
>  #endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */
> diff --git a/include/dt-bindings/clock/imx6sx-clock.h b/include/dt-bindings/clock/imx6sx-clock.h
> index 9957091..36f0324 100644
> --- a/include/dt-bindings/clock/imx6sx-clock.h
> +++ b/include/dt-bindings/clock/imx6sx-clock.h
> @@ -274,6 +274,7 @@
>  #define IMX6SX_PLL5_BYPASS             261
>  #define IMX6SX_PLL6_BYPASS             262
>  #define IMX6SX_PLL7_BYPASS             263
> -#define IMX6SX_CLK_CLK_END             264
> +#define IMX6SX_CLK_SPDIF_GCLK          264
> +#define IMX6SX_CLK_CLK_END             265
>  
>  #endif /* __DT_BINDINGS_CLOCK_IMX6SX_H */
> -- 
> 1.9.1
> 

  reply	other threads:[~2015-10-19 15:28 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-10 10:15 [PATCH V3 0/2] Add SPDIF_GCLK clock in clock tree for imx6 Shengjiu Wang
2015-10-10 10:15 ` [PATCH V3 1/2] clk: imx6: Add SPDIF_GCLK clock in clock tree Shengjiu Wang
2015-10-19 15:28   ` Michael Turquette [this message]
2015-10-19 15:36     ` Shawn Guo
2015-10-20 10:23       ` Michael Turquette
2015-10-10 10:15 ` [PATCH V3 2/2] ARM: dts: imx6: change the core clock of spdif Shengjiu Wang
2015-10-12 14:01 ` [PATCH V3 0/2] Add SPDIF_GCLK clock in clock tree for imx6 Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151019152807.20687.15779@quantum \
    --to=mturquette@baylibre.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).