From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Mon, 19 Oct 2015 20:05:13 +0200 Subject: [PATCH] ARM: dts: sun7i: Enable USB DRC on pcDuino v3 Nano In-Reply-To: <1445119709-1689-1-git-send-email-ats@offog.org> References: <1445119709-1689-1-git-send-email-ats@offog.org> Message-ID: <20151019180513.GW2711@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, Oct 17, 2015 at 11:08:29PM +0100, Adam Sampson wrote: > The OTG arrangement on the LinkSprite pcDuino v3 Nano is the same as the > pcDuino 1/2/3: the OTG port's 5V line is connected directly to the 5V > bus (it's not switchable), and the OTG port's ID pin is connected to PH4 > on the A20. > > Tested successfully in both host and device modes. > > Signed-off-by: Adam Sampson Applied, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: