From: helgaas@kernel.org (Bjorn Helgaas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/6] PCI: layerscape: remove ls_pcie_establish_link()
Date: Wed, 21 Oct 2015 16:40:05 -0500 [thread overview]
Message-ID: <20151021214005.GL1583@localhost> (raw)
In-Reply-To: <1444979960-24100-1-git-send-email-Minghuan.Lian@freescale.com>
On Fri, Oct 16, 2015 at 03:19:15PM +0800, Minghuan Lian wrote:
> ls_pcie_establish_link() does not do any real operation, except
> to wait for the linkup establishment. In fact, this is not
> necessary. Moreover, each PCIe controller not inserted device
> will increase the Linux startup time about 200ms.
>
> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
It'd be handy if there were a [0/6] cover letter where I could reply
with this update about the whole series.
I applied patches 1-5 to pci/host-layerscape for v4.4, thanks!
I split patch 5 (adding LS1043a and LS2080a support) into one patch
that removes the unused struct fields and a second patch that actually
adds the LS1043a and LS2080a support.
I haven't applied patch 6 because it doesn't make sense to me (more
details in the response to it). I'll be happy to apply it if you
explain what I'm missing.
Bjorn
> ---
> Change log
> v4: split from [PATCH v3] PCI: layerscape: Add PCIe support for LS1043a and LS2080a
>
> drivers/pci/host/pci-layerscape.c | 16 ----------------
> 1 file changed, 16 deletions(-)
>
> diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c
> index b2328ea1..6dd44a0 100644
> --- a/drivers/pci/host/pci-layerscape.c
> +++ b/drivers/pci/host/pci-layerscape.c
> @@ -11,7 +11,6 @@
> */
>
> #include <linux/kernel.h>
> -#include <linux/delay.h>
> #include <linux/interrupt.h>
> #include <linux/module.h>
> #include <linux/of_pci.h>
> @@ -62,27 +61,12 @@ static int ls_pcie_link_up(struct pcie_port *pp)
> return 1;
> }
>
> -static int ls_pcie_establish_link(struct pcie_port *pp)
> -{
> - unsigned int retries;
> -
> - for (retries = 0; retries < 200; retries++) {
> - if (dw_pcie_link_up(pp))
> - return 0;
> - usleep_range(100, 1000);
> - }
> -
> - dev_err(pp->dev, "phy link never came up\n");
> - return -EINVAL;
> -}
> -
> static void ls_pcie_host_init(struct pcie_port *pp)
> {
> struct ls_pcie *pcie = to_ls_pcie(pp);
> u32 val;
>
> dw_pcie_setup_rc(pp);
> - ls_pcie_establish_link(pp);
>
> /*
> * LS1021A Workaround for internal TKT228622
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2015-10-21 21:40 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-16 7:19 [PATCH v4 1/6] PCI: layerscape: remove ls_pcie_establish_link() Minghuan Lian
2015-10-16 7:19 ` [PATCH v4 2/6] PCI: layerscape: check PCIe controller work mode Minghuan Lian
2015-10-16 7:19 ` [PATCH v4 3/6] PCI: layerscape: factor out SCFG related function Minghuan Lian
2015-10-16 7:19 ` [PATCH v4 4/6] PCI: layerscape: update ls_add_pcie_port() Minghuan Lian
2015-10-16 7:19 ` [PATCH v4 5/6] PCI: layerscape: add PCIe support for LS1043a and LS2080a Minghuan Lian
2015-10-21 21:36 ` Bjorn Helgaas
2015-10-22 17:38 ` Li Yang
2015-10-22 18:08 ` Bjorn Helgaas
2015-10-22 19:17 ` Li Yang
2015-10-23 6:02 ` Lian M.H.
2015-11-02 21:08 ` Li Yang
2015-11-02 21:36 ` Bjorn Helgaas
2015-10-22 15:47 ` Bjorn Helgaas
2015-10-23 5:48 ` Lian M.H.
2015-10-16 7:19 ` [PATCH v4 6/6] PCI: layerscape: add ls_pcie_msi_host_init Minghuan Lian
2015-10-21 21:34 ` Bjorn Helgaas
2015-10-22 3:03 ` Lian M.H.
2015-10-22 16:21 ` Bjorn Helgaas
2015-10-23 3:39 ` Lian M.H.
2015-11-02 21:06 ` Bjorn Helgaas
2015-11-03 6:08 ` Lian M.H.
2015-10-21 21:40 ` Bjorn Helgaas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151021214005.GL1583@localhost \
--to=helgaas@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).