[PATCH 5/6] ARM: dts: sunxi: Add Allwinner H3 DTSI

[maxime.ripard@free-electrons.com (Maxime Ripard)]

On Thu, Oct 22, 2015 at 10:29:59AM +0200, Jean-Francois Moine wrote:
> On Thu, 22 Oct 2015 10:05:08 +0200
> Maxime Ripard <maxime.ripard@free-electrons.com> wrote:
> 
> > > +		uart0: serial at 01c28000 {
> > > +			compatible = "snps,dw-apb-uart";
> > > +			reg = <0x01c28000 0x400>;
> > > +			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> > > +			reg-shift = <2>;
> > > +			reg-io-width = <4>;
> > > +			clocks = <&bus_gates 112>;
> > > +			resets = <&bus_rst 208>;  
> > 
> > It's a bit weird that the clocks and reset indices don't match,
> > usually they do.
> > 
> > What's even weirder is that there's a 96 offset between the two (4 *
> > 32), is this expected?
> 
> Yes, this is conform to the H3 documentation.

Not really. The uart0 reset is the bit 16, in the reset register 4.

4 * 32 + 16 = 44.

Not 112, but still not 208 either.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151022/c2923062/attachment.sig>