From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Thu, 22 Oct 2015 10:58:24 +0200 Subject: [PATCH v2] ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tablet In-Reply-To: <1445378669-21622-1-git-send-email-hdegoede@redhat.com> References: <1445378669-21622-1-git-send-email-hdegoede@redhat.com> Message-ID: <20151022085824.GU10947@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Oct 21, 2015 at 12:04:29AM +0200, Hans de Goede wrote: > The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen, > microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors. > > It uses a rtl8188cus usb wifi chip and a RDA 5875Y bluetooth chip attached > to uart2. It has a bma250 accelerometer attached to i2c1 addr 0x18, this > only works when ldo3 is set to 2.8 volt, otherwise i2c1 gets stuck, so > for now we mark i2c1 as failed. > > It has a pixcir,pixcir_tangoc compatible touchscreen attached to i2c2 addr > 0x5c. This is not enabled in this dts, because this variant of the > pixcir_tangoc has separate wakeup and enable pins both of which need > to be driven low before the touchscreen will work. Before we can enable > this the pixcir driver and devicetree-bindings need to be extended to > support these pins. > > Signed-off-by: Hans de Goede Applied, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: