[PATCH] pinctrl-zynq: Initialize early

[soren.brinkmann@xilinx.com (Sören Brinkmann)]

Hi Mike,

On Thu, 2015-10-22 at 01:30PM +0200, Mike Looijmans wrote:
> Supplying pinmux configuration for e.g. gpio pins leads to deferred
> probes because the pinctrl device is probed much later than gpio.
> Move the init call to a much earlier stage so it probes before the
> devices that may need it.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>

in general, the change should be OK, but neither on zc702 nor zc706 do I
see a difference in respect to deferred probes. With and without the
patch I see:
    root at zynq:~# dmesg | grep -i defer
    [    0.097021] zynq-gpio e000a000.gpio: could not find pctldev for node /amba/slcr at f8000000/pinctrl at 700/gpio0-default, deferring probe
    root at zynq:~# 

If you have a case this patch improves things though, feel free to add my
Tested-by: S?ren Brinkmann <soren.brinkmann@xilinx.com>

	Thanks,
	S?ren