From mboxrd@z Thu Jan 1 00:00:00 1970 From: wsa@the-dreams.de (Wolfram Sang) Date: Sun, 25 Oct 2015 09:25:02 +0100 Subject: [PATCH-v5 RESEND 3/5] i2c: pxa: Add support for pxa910/988 & new configuration features In-Reply-To: <1440395978-9065-4-git-send-email-vaibhav.hiremath@linaro.org> References: <1440395978-9065-1-git-send-email-vaibhav.hiremath@linaro.org> <1440395978-9065-4-git-send-email-vaibhav.hiremath@linaro.org> Message-ID: <20151025082502.GB2159@katana> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Aug 24, 2015 at 11:29:36AM +0530, Vaibhav Hiremath wrote: > TWSI_ILCR & TWSI_IWCR registers are used to adjust clock rate > of standard & fast mode in pxa910/988; so this patch adds these two new > entries to "struct pxa_reg_layout" and "struct pxa_i2c". > > As discussed in the previous patch-series, the idea here is to add standard > DT properties for ilcr and iwcr configuration fields. > In case of Master ilcr is used for low/high time and in case of slave mode > of operation iwcr is used for setup/hold time. > > Signed-off-by: Jett.Zhou > Signed-off-by: Yi Zhang > Signed-off-by: Vaibhav Hiremath > Tested-by: Robert Jarzmik Fixed this checkpatch warning: CHECK: Please don't use multiple blank lines #82: FILE: drivers/i2c/busses/i2c-pxa.c:157: + + and applied to for-next, thanks! -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: