From: s.trumtrar@pengutronix.de (Steffen Trumtrar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv7 2/2] ARM: socfpga: Enable OCRAM ECC on startup
Date: Wed, 28 Oct 2015 11:59:57 +0100 [thread overview]
Message-ID: <20151028105957.GN1166@pengutronix.de> (raw)
In-Reply-To: <1445979581-8080-2-git-send-email-dinguyen@opensource.altera.com>
On Tue, Oct 27, 2015 at 03:59:41PM -0500, dinguyen at opensource.altera.com wrote:
> From: Dinh Nguyen <dinguyen@opensource.altera.com>
>
> This patch enables the ECC for On-Chip RAM on machine startup. The ECC
> has to be enabled before data is stored in memory otherwise the ECC will
> fail on reads.
>
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> ---
> v7: enable OCRAM ECC during platform init
> v6: Implement OCRAM discovery changes from community. Add
> of_node_put(). Remove be32_to_cpup(). Use __init() which
> allows removal of .init_machine(). Update year in header.
> ---
> arch/arm/mach-socfpga/Makefile | 1 +
> arch/arm/mach-socfpga/core.h | 1 +
> arch/arm/mach-socfpga/ocram.c | 50 +++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-socfpga/socfpga.c | 3 +++
> 4 files changed, 55 insertions(+)
> create mode 100644 arch/arm/mach-socfpga/ocram.c
>
> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
> index e9ab7c9..ed15db1 100644
> --- a/arch/arm/mach-socfpga/Makefile
> +++ b/arch/arm/mach-socfpga/Makefile
> @@ -6,3 +6,4 @@ obj-y := socfpga.o
> obj-$(CONFIG_SMP) += headsmp.o platsmp.o
> obj-$(CONFIG_SOCFPGA_SUSPEND) += pm.o self-refresh.o
> obj-$(CONFIG_EDAC_ALTERA_L2C) += l2_cache.o
> +obj-$(CONFIG_EDAC_ALTERA_OCRAM) += ocram.o
> diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
> index eb55d66..575195b 100644
> --- a/arch/arm/mach-socfpga/core.h
> +++ b/arch/arm/mach-socfpga/core.h
> @@ -37,6 +37,7 @@
> extern void socfpga_init_clocks(void);
> extern void socfpga_sysmgr_init(void);
> void socfpga_init_l2_ecc(void);
> +void socfpga_init_ocram_ecc(void);
>
> extern void __iomem *sys_manager_base_addr;
> extern void __iomem *rst_manager_base_addr;
> diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
> new file mode 100644
> index 0000000..336e165
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/ocram.c
> @@ -0,0 +1,50 @@
> +/*
> + * Copyright Altera Corporation (C) 2015. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/io.h>
> +#include <linux/genalloc.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +
> +#define ALTR_OCRAM_CLEAR_ECC 0x00000018
> +#define ALTR_OCRAM_ECC_EN 0x00000019
> +
> +void socfpga_init_ocram_ecc(void)
> +{
> + struct device_node *np;
> + void __iomem *mapped_ocr_edac_addr;
> +
> + /* Find the OCRAM EDAC device tree node */
> + np = of_find_compatible_node(NULL, NULL, "altr,ocram-edac");
> + if (!np) {
> + pr_err("%s: Unable to find altr,ocram-edac\n", __func__);
Do we need the __func__ info here?
> + return;
> + }
> +
> + mapped_ocr_edac_addr = of_iomap(np, 0);
> + if (!mapped_ocr_edac_addr) {
> + of_node_put(np);
> + pr_err("%s: Unable to map OCRAM ecc regs.\n", __func__);
of_node_full_name?
> + return;
> + }
> +
> + /* Clear any pending OCRAM ECC interrupts, then enable ECC */
> + writel(ALTR_OCRAM_CLEAR_ECC, mapped_ocr_edac_addr);
> + writel(ALTR_OCRAM_ECC_EN, mapped_ocr_edac_addr);
> +
> + iounmap(mapped_ocr_edac_addr);
> + of_node_put(np);
> +}
> diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
> index dd1ff07..7e0aad2 100644
> --- a/arch/arm/mach-socfpga/socfpga.c
> +++ b/arch/arm/mach-socfpga/socfpga.c
> @@ -61,6 +61,9 @@ static void __init socfpga_init_irq(void)
> socfpga_sysmgr_init();
> if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C))
> socfpga_init_l2_ecc();
> +
> + if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
> + socfpga_init_ocram_ecc();
> }
>
> static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
> --
> 2.4.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2015-10-28 10:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-27 20:59 [PATCHv7 1/2] ARM: socfpga: enable L2 cache ECC on startup dinguyen at opensource.altera.com
2015-10-27 20:59 ` [PATCHv7 2/2] ARM: socfpga: Enable OCRAM " dinguyen at opensource.altera.com
2015-10-28 10:59 ` Steffen Trumtrar [this message]
2015-10-28 20:15 ` Dinh Nguyen
2015-10-28 10:58 ` [PATCHv7 1/2] ARM: socfpga: enable L2 cache " Steffen Trumtrar
2015-10-28 19:59 ` Dinh Nguyen
[not found] ` <20160120131654.GA18466@amd>
2016-01-21 9:52 ` ARM: socfpga: SPI NOR support for Linux 4.4? Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151028105957.GN1166@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).