From mboxrd@z Thu Jan 1 00:00:00 1970 From: l.majewski@samsung.com (Lukasz Majewski) Date: Wed, 04 Nov 2015 12:17:54 +0100 Subject: [PATCH 3/5] thermal: exynos: Use IS_ERR() because regulator cannot be NULL In-Reply-To: References: <1444282446-6419-1-git-send-email-k.kozlowski@samsung.com> <1444282446-6419-3-git-send-email-k.kozlowski@samsung.com> Message-ID: <20151104121754.70c5f148@amdc2363> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Alim, > Hello, > > On Thu, Oct 8, 2015 at 11:04 AM, Krzysztof Kozlowski > wrote: > > The NULL check in probe's error path is not needed because in that > > time the regulator cannot be NULL (regulator_get() returns valid > > pointer or ERR_PTR). > > > > Signed-off-by: Krzysztof Kozlowski > > --- > Reviewed-by: Alim Akhtar > > > drivers/thermal/samsung/exynos_tmu.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/thermal/samsung/exynos_tmu.c > > b/drivers/thermal/samsung/exynos_tmu.c index > > bc71a61f0c4a..eac6aebf82f3 100644 --- > > a/drivers/thermal/samsung/exynos_tmu.c +++ > > b/drivers/thermal/samsung/exynos_tmu.c @@ -1396,7 +1396,7 @@ > > err_clk_sec: if (!IS_ERR(data->clk_sec)) > > clk_unprepare(data->clk_sec); > > err_sensor: > > - if (!IS_ERR_OR_NULL(data->regulator)) > > + if (!IS_ERR(data->regulator)) > > regulator_disable(data->regulator); > > > > return ret; > > -- > > 1.9.1 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe > > linux-samsung-soc" in the body of a message to > > majordomo at vger.kernel.org More majordomo info at > > http://vger.kernel.org/majordomo-info.html > > > Acked-by: Lukasz Majewski Tested-by: Lukasz Majewski -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group