From mboxrd@z Thu Jan 1 00:00:00 1970 From: marex@denx.de (Marek Vasut) Date: Thu, 5 Nov 2015 03:25:32 +0100 Subject: [PATCH V2 2/3] ARM: at91/dt: sama5d4: Add pinmux for 8-bit MMC0 bus In-Reply-To: <563ABBCD.8090802@atmel.com> References: <1446675264-5514-1-git-send-email-marex@denx.de> <1446675264-5514-2-git-send-email-marex@denx.de> <563ABBCD.8090802@atmel.com> Message-ID: <201511050325.32235.marex@denx.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thursday, November 05, 2015 at 03:15:41 AM, Josh Wu wrote: > Hi, Marek > > On 11/5/2015 6:14 AM, Marek Vasut wrote: > > Add pinmux for the 4 remaining signals used in 8-bit MMC 0 > > bus configuration. > > > > Signed-off-by: Marek Vasut > > Cc: Alexandre Belloni > > Cc: Josh Wu > > Cc: Nicolas Ferre > > --- > > > > arch/arm/boot/dts/sama5d4.dtsi | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > V2: Repair the incorrect comments for the pinmux, original version > > > > of the commment contained wrong MCI0_DAx references. > > > > diff --git a/arch/arm/boot/dts/sama5d4.dtsi > > b/arch/arm/boot/dts/sama5d4.dtsi index 48ca530..d086a7d 100644 > > --- a/arch/arm/boot/dts/sama5d4.dtsi > > +++ b/arch/arm/boot/dts/sama5d4.dtsi > > @@ -1651,6 +1651,14 @@ > > > > AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA3, > > conflict with NAND_D4 */ > > > > >; > > > > }; > > > > + pinctrl_mmc0_dat4_7: mmc0_dat4_7 { > > + atmel,pins = > > + > conflict with NAND_D5 */ + AT91_PIOC 11 AT91_PERIPH_B > > AT91_PINCTRL_PULL_UP /* MCI0_DA5, conflict with NAND_D6 */ + > > AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA6, conflict > > with NAND_D7 */ + AT91_PIOC 13 AT91_PERIPH_B > > AT91_PINCTRL_PULL_UP /* MCI0_DA7, conflict with NAND_D8 */ > > PC13 is conflicted with NRD/NANDOE, not D8 (PB18). > with this comment fix, you can add: > Reviewed-by: Josh Wu Thanks, patch is out, hope I got it right this time. Best regards, Marek Vasut