* aarch64-linux-gnu-objdump gives all zeros in init_sequence_f[]
@ 2015-11-12 5:43 Shawn Guo
2015-11-12 6:36 ` Ard Biesheuvel
2015-11-12 7:20 ` [U-Boot] " Albert ARIBAUD
0 siblings, 2 replies; 5+ messages in thread
From: Shawn Guo @ 2015-11-12 5:43 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
I need some help to understand aarch64-linux-gnu-objdump output in .data
section as below. It's part of the dump of u-boot image with command
'aarch64-linux-gnu-objdump -D -z u-boot'.
Disassembly of section .data:
0000000035039898 <reserved_list>:
<snip>
0000000035039948 <init_sequence_f>:
35039948: 00000000 .word 0x00000000
3503994c: 00000000 .word 0x00000000
35039950: 00000000 .word 0x00000000
35039954: 00000000 .word 0x00000000
35039958: 00000000 .word 0x00000000
3503995c: 00000000 .word 0x00000000
35039960: 00000000 .word 0x00000000
35039964: 00000000 .word 0x00000000
35039968: 00000000 .word 0x00000000
3503996c: 00000000 .word 0x00000000
35039970: 00000000 .word 0x00000000
35039974: 00000000 .word 0x00000000
35039978: 00000000 .word 0x00000000
3503997c: 00000000 .word 0x00000000
35039980: 00000000 .word 0x00000000
35039984: 00000000 .word 0x00000000
35039988: 00000000 .word 0x00000000
3503998c: 00000000 .word 0x00000000
35039990: 00000000 .word 0x00000000
35039994: 00000000 .word 0x00000000
35039998: 00000000 .word 0x00000000
3503999c: 00000000 .word 0x00000000
350399a0: 00000000 .word 0x00000000
350399a4: 00000000 .word 0x00000000
350399a8: 00000000 .word 0x00000000
350399ac: 00000000 .word 0x00000000
350399b0: 00000000 .word 0x00000000
350399b4: 00000000 .word 0x00000000
350399b8: 00000000 .word 0x00000000
350399bc: 00000000 .word 0x00000000
350399c0: 00000000 .word 0x00000000
350399c4: 00000000 .word 0x00000000
350399c8: 00000000 .word 0x00000000
350399cc: 00000000 .word 0x00000000
350399d0: 00000000 .word 0x00000000
350399d4: 00000000 .word 0x00000000
350399d8: 00000000 .word 0x00000000
350399dc: 00000000 .word 0x00000000
350399e0: 00000000 .word 0x00000000
350399e4: 00000000 .word 0x00000000
350399e8: 00000000 .word 0x00000000
350399ec: 00000000 .word 0x00000000
350399f0: 00000000 .word 0x00000000
350399f4: 00000000 .word 0x00000000
350399f8: 00000000 .word 0x00000000
350399fc: 00000000 .word 0x00000000
35039a00: 00000000 .word 0x00000000
35039a04: 00000000 .word 0x00000000
35039a08: 00000000 .word 0x00000000
35039a0c: 00000000 .word 0x00000000
35039a10: 00000000 .word 0x00000000
35039a14: 00000000 .word 0x00000000
35039a18: 00000000 .word 0x00000000
35039a1c: 00000000 .word 0x00000000
35039a20: 00000000 .word 0x00000000
35039a24: 00000000 .word 0x00000000
35039a28: 00000000 .word 0x00000000
35039a2c: 00000000 .word 0x00000000
35039a30: 00000000 .word 0x00000000
35039a34: 00000000 .word 0x00000000
35039a38: 00000000 .word 0x00000000
35039a3c: 00000000 .word 0x00000000
35039a40: 00000000 .word 0x00000000
35039a44: 00000000 .word 0x00000000
35039a48: 00000000 .word 0x00000000
35039a4c: 00000000 .word 0x00000000
The init_sequence_f[] is an array defined in U-Boot v2015.04 source
common/board_f.c, which holds a bunch of pointers to critical
initialization functions that have to be called during boot. Obviously,
the array cannot be all zeros like what objdump tells. And I confirmed
that by printing the pointers at run-time as below.
init_sequence_f[0]: 0000000035004280
init_sequence_f[1]: 00000000350042a8
init_sequence_f[2]: 0000000035004380
init_sequence_f[3]: 00000000350042a0
init_sequence_f[4]: 00000000350044b8
init_sequence_f[5]: 0000000035004388
init_sequence_f[6]: 0000000035029538
init_sequence_f[7]: 000000003500675c
init_sequence_f[8]: 000000003500447c
init_sequence_f[9]: 000000003501d864
init_sequence_f[10]: 0000000035013778
init_sequence_f[11]: 0000000035004398
init_sequence_f[12]: 0000000035028ab8
init_sequence_f[13]: 0000000035004278
init_sequence_f[14]: 0000000035004270
init_sequence_f[15]: 000000003500445c
init_sequence_f[16]: 0000000035001f20
init_sequence_f[17]: 0000000035004574
init_sequence_f[18]: 00000000350042b0
init_sequence_f[19]: 00000000350042c4
init_sequence_f[20]: 00000000350042cc
init_sequence_f[21]: 00000000350042f8
init_sequence_f[22]: 00000000350044d4
init_sequence_f[23]: 000000003500430c
init_sequence_f[24]: 0000000035004314
init_sequence_f[25]: 0000000035004330
init_sequence_f[26]: 0000000035004390
init_sequence_f[27]: 00000000350045bc
init_sequence_f[28]: 0000000035004550
init_sequence_f[29]: 0000000035004518
init_sequence_f[30]: 0000000035004378
init_sequence_f[31]: 0000000035004428
init_sequence_f[32]: 00000000350043f0
Dumping an u-boot image built for 32-bit platform with
arm-linux-gnueabi-objdump gives correct pointer values for the same
array.
17853c7c <init_sequence_f>:
17853c7c: 17805600 strne r5, [r0, r0, lsl #12]
17853c80: 17805620 strne r5, [r0, r0, lsr #12]
17853c84: 1780574c strne r5, [r0, ip, asr #14]
17853c88: 178007ec strne r0, [r0, ip, ror #15]
17853c8c: 1780583c ; <UNDEFINED> instruction: 0x1780583c
17853c90: 17805834 ; <UNDEFINED> instruction: 0x17805834
17853c94: 1780315c ; <UNDEFINED> instruction: 0x1780315c
17853c98: 178015f4 ; <UNDEFINED> instruction: 0x178015f4
17853c9c: 17800890 ; <UNDEFINED> instruction: 0x17800890
17853ca0: 17801c0c strne r1, [r0, ip, lsl #24]
17853ca4: 178078f8 ; <UNDEFINED> instruction: 0x178078f8
17853ca8: 17805808 strne r5, [r0, r8, lsl #16]
17853cac: 17829564 strne r9, [r2, r4, ror #10]
17853cb0: 17816104 strne r6, [r1, r4, lsl #2]
17853cb4: 1783dea4 strne sp, [r3, r4, lsr #29]
17853cb8: 178055f8 ; <UNDEFINED> instruction: 0x178055f8
17853cbc: 17801a54 ; <UNDEFINED> instruction: 0x17801a54
17853cc0: 17805b4c strne r5, [r0, ip, asr #22]
17853cc4: 178057e0 strne r5, [r0, r0, ror #15]
17853cc8: 178057c8 strne r5, [r0, r8, asr #15]
17853ccc: 17802e20 strne r2, [r0, r0, lsr #28]
17853cd0: 17805910 usada8ne r0, r0, r9, r5
17853cd4: 17805628 strne r5, [r0, r8, lsr #12]
17853cd8: 17805640 strne r5, [r0, r0, asr #12]
17853cdc: 17805678 ; <UNDEFINED> instruction: 0x17805678
17853ce0: 17805680 strne r5, [r0, r0, lsl #13]
17853ce4: 178056b0 ; <UNDEFINED> instruction: 0x178056b0
17853ce8: 17805850 ; <UNDEFINED> instruction: 0x17805850
17853cec: 178056c8 strne r5, [r0, r8, asr #13]
17853cf0: 178056dc ; <UNDEFINED> instruction: 0x178056dc
17853cf4: 178056f8 ; <UNDEFINED> instruction: 0x178056f8
17853cf8: 17805768 strne r5, [r0, r8, ror #14]
17853cfc: 17805950 ; <UNDEFINED> instruction: 0x17805950
17853d00: 178058ec strne r5, [r0, ip, ror #17]
17853d04: 17805894 ; <UNDEFINED> instruction: 0x17805894
17853d08: 17805744 strne r5, [r0, r4, asr #14]
17853d0c: 17805798 ; <UNDEFINED> instruction: 0x17805798
17853d10: 17805770 ; <UNDEFINED> instruction: 0x17805770
17853d14: 00000000 andeq r0, r0, r0
Here are my questions:
- Is this only because that ARM 64-bit toolchain doesn't show the real
value of the pointers, or there are some linking or run-time magics to
get these pointers correct when the binary is actually running?
- Is this different behavior between ARM 32-bit and 64-bit toolchain
expected? Or did I miss anything on 64-bit toolchain usage?
Any hints or comments are much appreciated.
Thanks,
Shawn
^ permalink raw reply [flat|nested] 5+ messages in thread
* aarch64-linux-gnu-objdump gives all zeros in init_sequence_f[]
2015-11-12 5:43 aarch64-linux-gnu-objdump gives all zeros in init_sequence_f[] Shawn Guo
@ 2015-11-12 6:36 ` Ard Biesheuvel
2015-11-12 8:12 ` Shawn Guo
2015-11-12 7:20 ` [U-Boot] " Albert ARIBAUD
1 sibling, 1 reply; 5+ messages in thread
From: Ard Biesheuvel @ 2015-11-12 6:36 UTC (permalink / raw)
To: linux-arm-kernel
On 12 November 2015 at 06:43, Shawn Guo <shawn.guo@linaro.org> wrote:
> Hi,
>
> I need some help to understand aarch64-linux-gnu-objdump output in .data
> section as below. It's part of the dump of u-boot image with command
> 'aarch64-linux-gnu-objdump -D -z u-boot'.
>
> Disassembly of section .data:
>
> 0000000035039898 <reserved_list>:
> <snip>
>
> 0000000035039948 <init_sequence_f>:
> 35039948: 00000000 .word 0x00000000
[...]
> 35039a48: 00000000 .word 0x00000000
> 35039a4c: 00000000 .word 0x00000000
>
> The init_sequence_f[] is an array defined in U-Boot v2015.04 source
> common/board_f.c, which holds a bunch of pointers to critical
> initialization functions that have to be called during boot. Obviously,
> the array cannot be all zeros like what objdump tells. And I confirmed
> that by printing the pointers at run-time as below.
>
[..]
>
> Here are my questions:
>
> - Is this only because that ARM 64-bit toolchain doesn't show the real
> value of the pointers, or there are some linking or run-time magics to
> get these pointers correct when the binary is actually running?
>
AArch64 uses the ELF RELA relocation format, where the target location
of the relocation is not used to hold the addend. In contrast, ARM
uses the REL format, where the addend is stored in the same place
where the result of the relocation computation needs to be stored.
Since U-Boot is a PIE executable, it makes heavy use of
R_ARM_RELATIVE/R_AARCH64_RELATIVE relocations, which are not symbol
based, but simply point to places in the binary such as your init
array) where the offset between the link time and load time addresses
needs to be taken into account. For this type of relocation (and since
the u-boot link time base address is 0x0), the addends happen to
coincide with the actual addresses of the functions. These relocations
are applied at runtime by u-boot itself, since it moves itself to the
top of DRAM right after boot.
In the AArch64 case, these addends are stored in the relocation
entries themselves. If you dump the relocations form the u-boot binary
using readelf, you will probably find the values you are looking for.
> - Is this different behavior between ARM 32-bit and 64-bit toolchain
> expected? Or did I miss anything on 64-bit toolchain usage?
>
This is expected, although a bit unfortunate, since you may need a
post-build step to apply the relocations in case you need them applied
in the static image (i.e., a ROM image).
--
Ard.
> Any hints or comments are much appreciated.
>
> Thanks,
> Shawn
> _______________________________________________
> linaro-dev mailing list
> linaro-dev at lists.linaro.org
> https://lists.linaro.org/mailman/listinfo/linaro-dev
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] aarch64-linux-gnu-objdump gives all zeros in init_sequence_f[]
2015-11-12 5:43 aarch64-linux-gnu-objdump gives all zeros in init_sequence_f[] Shawn Guo
2015-11-12 6:36 ` Ard Biesheuvel
@ 2015-11-12 7:20 ` Albert ARIBAUD
2015-11-12 8:15 ` Shawn Guo
1 sibling, 1 reply; 5+ messages in thread
From: Albert ARIBAUD @ 2015-11-12 7:20 UTC (permalink / raw)
To: linux-arm-kernel
Hello Shawn,
On Thu, 12 Nov 2015 13:43:18 +0800, Shawn Guo <shawn.guo@linaro.org>
wrote:
> Hi,
>
> I need some help to understand aarch64-linux-gnu-objdump output in .data
> section as below. It's part of the dump of u-boot image with command
> 'aarch64-linux-gnu-objdump -D -z u-boot'.
>
> Disassembly of section .data:
>
> 0000000035039898 <reserved_list>:
> <snip>
>
> 0000000035039948 <init_sequence_f>:
> 35039948: 00000000 .word 0x00000000
> 3503994c: 00000000 .word 0x00000000
> 35039950: 00000000 .word 0x00000000
> 35039954: 00000000 .word 0x00000000
> 35039958: 00000000 .word 0x00000000
> 3503995c: 00000000 .word 0x00000000
> 35039960: 00000000 .word 0x00000000
> 35039964: 00000000 .word 0x00000000
> 35039968: 00000000 .word 0x00000000
> 3503996c: 00000000 .word 0x00000000
> 35039970: 00000000 .word 0x00000000
> 35039974: 00000000 .word 0x00000000
> 35039978: 00000000 .word 0x00000000
> 3503997c: 00000000 .word 0x00000000
> 35039980: 00000000 .word 0x00000000
> 35039984: 00000000 .word 0x00000000
> 35039988: 00000000 .word 0x00000000
> 3503998c: 00000000 .word 0x00000000
> 35039990: 00000000 .word 0x00000000
> 35039994: 00000000 .word 0x00000000
> 35039998: 00000000 .word 0x00000000
> 3503999c: 00000000 .word 0x00000000
> 350399a0: 00000000 .word 0x00000000
> 350399a4: 00000000 .word 0x00000000
> 350399a8: 00000000 .word 0x00000000
> 350399ac: 00000000 .word 0x00000000
> 350399b0: 00000000 .word 0x00000000
> 350399b4: 00000000 .word 0x00000000
> 350399b8: 00000000 .word 0x00000000
> 350399bc: 00000000 .word 0x00000000
> 350399c0: 00000000 .word 0x00000000
> 350399c4: 00000000 .word 0x00000000
> 350399c8: 00000000 .word 0x00000000
> 350399cc: 00000000 .word 0x00000000
> 350399d0: 00000000 .word 0x00000000
> 350399d4: 00000000 .word 0x00000000
> 350399d8: 00000000 .word 0x00000000
> 350399dc: 00000000 .word 0x00000000
> 350399e0: 00000000 .word 0x00000000
> 350399e4: 00000000 .word 0x00000000
> 350399e8: 00000000 .word 0x00000000
> 350399ec: 00000000 .word 0x00000000
> 350399f0: 00000000 .word 0x00000000
> 350399f4: 00000000 .word 0x00000000
> 350399f8: 00000000 .word 0x00000000
> 350399fc: 00000000 .word 0x00000000
> 35039a00: 00000000 .word 0x00000000
> 35039a04: 00000000 .word 0x00000000
> 35039a08: 00000000 .word 0x00000000
> 35039a0c: 00000000 .word 0x00000000
> 35039a10: 00000000 .word 0x00000000
> 35039a14: 00000000 .word 0x00000000
> 35039a18: 00000000 .word 0x00000000
> 35039a1c: 00000000 .word 0x00000000
> 35039a20: 00000000 .word 0x00000000
> 35039a24: 00000000 .word 0x00000000
> 35039a28: 00000000 .word 0x00000000
> 35039a2c: 00000000 .word 0x00000000
> 35039a30: 00000000 .word 0x00000000
> 35039a34: 00000000 .word 0x00000000
> 35039a38: 00000000 .word 0x00000000
> 35039a3c: 00000000 .word 0x00000000
> 35039a40: 00000000 .word 0x00000000
> 35039a44: 00000000 .word 0x00000000
> 35039a48: 00000000 .word 0x00000000
> 35039a4c: 00000000 .word 0x00000000
>
> The init_sequence_f[] is an array defined in U-Boot v2015.04 source
> common/board_f.c, which holds a bunch of pointers to critical
> initialization functions that have to be called during boot. Obviously,
> the array cannot be all zeros like what objdump tells. And I confirmed
> that by printing the pointers at run-time as below.
>
> init_sequence_f[0]: 0000000035004280
> init_sequence_f[1]: 00000000350042a8
> init_sequence_f[2]: 0000000035004380
> init_sequence_f[3]: 00000000350042a0
> init_sequence_f[4]: 00000000350044b8
> init_sequence_f[5]: 0000000035004388
> init_sequence_f[6]: 0000000035029538
> init_sequence_f[7]: 000000003500675c
> init_sequence_f[8]: 000000003500447c
> init_sequence_f[9]: 000000003501d864
> init_sequence_f[10]: 0000000035013778
> init_sequence_f[11]: 0000000035004398
> init_sequence_f[12]: 0000000035028ab8
> init_sequence_f[13]: 0000000035004278
> init_sequence_f[14]: 0000000035004270
> init_sequence_f[15]: 000000003500445c
> init_sequence_f[16]: 0000000035001f20
> init_sequence_f[17]: 0000000035004574
> init_sequence_f[18]: 00000000350042b0
> init_sequence_f[19]: 00000000350042c4
> init_sequence_f[20]: 00000000350042cc
> init_sequence_f[21]: 00000000350042f8
> init_sequence_f[22]: 00000000350044d4
> init_sequence_f[23]: 000000003500430c
> init_sequence_f[24]: 0000000035004314
> init_sequence_f[25]: 0000000035004330
> init_sequence_f[26]: 0000000035004390
> init_sequence_f[27]: 00000000350045bc
> init_sequence_f[28]: 0000000035004550
> init_sequence_f[29]: 0000000035004518
> init_sequence_f[30]: 0000000035004378
> init_sequence_f[31]: 0000000035004428
> init_sequence_f[32]: 00000000350043f0
>
> Dumping an u-boot image built for 32-bit platform with
> arm-linux-gnueabi-objdump gives correct pointer values for the same
> array.
>
> 17853c7c <init_sequence_f>:
> 17853c7c: 17805600 strne r5, [r0, r0, lsl #12]
> 17853c80: 17805620 strne r5, [r0, r0, lsr #12]
> 17853c84: 1780574c strne r5, [r0, ip, asr #14]
> 17853c88: 178007ec strne r0, [r0, ip, ror #15]
> 17853c8c: 1780583c ; <UNDEFINED> instruction: 0x1780583c
> 17853c90: 17805834 ; <UNDEFINED> instruction: 0x17805834
> 17853c94: 1780315c ; <UNDEFINED> instruction: 0x1780315c
> 17853c98: 178015f4 ; <UNDEFINED> instruction: 0x178015f4
> 17853c9c: 17800890 ; <UNDEFINED> instruction: 0x17800890
> 17853ca0: 17801c0c strne r1, [r0, ip, lsl #24]
> 17853ca4: 178078f8 ; <UNDEFINED> instruction: 0x178078f8
> 17853ca8: 17805808 strne r5, [r0, r8, lsl #16]
> 17853cac: 17829564 strne r9, [r2, r4, ror #10]
> 17853cb0: 17816104 strne r6, [r1, r4, lsl #2]
> 17853cb4: 1783dea4 strne sp, [r3, r4, lsr #29]
> 17853cb8: 178055f8 ; <UNDEFINED> instruction: 0x178055f8
> 17853cbc: 17801a54 ; <UNDEFINED> instruction: 0x17801a54
> 17853cc0: 17805b4c strne r5, [r0, ip, asr #22]
> 17853cc4: 178057e0 strne r5, [r0, r0, ror #15]
> 17853cc8: 178057c8 strne r5, [r0, r8, asr #15]
> 17853ccc: 17802e20 strne r2, [r0, r0, lsr #28]
> 17853cd0: 17805910 usada8ne r0, r0, r9, r5
> 17853cd4: 17805628 strne r5, [r0, r8, lsr #12]
> 17853cd8: 17805640 strne r5, [r0, r0, asr #12]
> 17853cdc: 17805678 ; <UNDEFINED> instruction: 0x17805678
> 17853ce0: 17805680 strne r5, [r0, r0, lsl #13]
> 17853ce4: 178056b0 ; <UNDEFINED> instruction: 0x178056b0
> 17853ce8: 17805850 ; <UNDEFINED> instruction: 0x17805850
> 17853cec: 178056c8 strne r5, [r0, r8, asr #13]
> 17853cf0: 178056dc ; <UNDEFINED> instruction: 0x178056dc
> 17853cf4: 178056f8 ; <UNDEFINED> instruction: 0x178056f8
> 17853cf8: 17805768 strne r5, [r0, r8, ror #14]
> 17853cfc: 17805950 ; <UNDEFINED> instruction: 0x17805950
> 17853d00: 178058ec strne r5, [r0, ip, ror #17]
> 17853d04: 17805894 ; <UNDEFINED> instruction: 0x17805894
> 17853d08: 17805744 strne r5, [r0, r4, asr #14]
> 17853d0c: 17805798 ; <UNDEFINED> instruction: 0x17805798
> 17853d10: 17805770 ; <UNDEFINED> instruction: 0x17805770
> 17853d14: 00000000 andeq r0, r0, r0
>
> Here are my questions:
>
> - Is this only because that ARM 64-bit toolchain doesn't show the real
> value of the pointers, or there are some linking or run-time magics to
> get these pointers correct when the binary is actually running?
>
> - Is this different behavior between ARM 32-bit and 64-bit toolchain
> expected? Or did I miss anything on 64-bit toolchain usage?
>
> Any hints or comments are much appreciated.
Can you provide the target name and commit ID that you are building,
s well as the version of the toolchain that you are building with?
Without being able to reproduce your issue, it's kind of hard to
diagnose it.
> Thanks,
> Shawn
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 5+ messages in thread
* aarch64-linux-gnu-objdump gives all zeros in init_sequence_f[]
2015-11-12 6:36 ` Ard Biesheuvel
@ 2015-11-12 8:12 ` Shawn Guo
0 siblings, 0 replies; 5+ messages in thread
From: Shawn Guo @ 2015-11-12 8:12 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 12, 2015 at 07:36:02AM +0100, Ard Biesheuvel wrote:
> On 12 November 2015 at 06:43, Shawn Guo <shawn.guo@linaro.org> wrote:
> > Here are my questions:
> >
> > - Is this only because that ARM 64-bit toolchain doesn't show the real
> > value of the pointers, or there are some linking or run-time magics to
> > get these pointers correct when the binary is actually running?
> >
>
> AArch64 uses the ELF RELA relocation format, where the target location
> of the relocation is not used to hold the addend. In contrast, ARM
> uses the REL format, where the addend is stored in the same place
> where the result of the relocation computation needs to be stored.
>
> Since U-Boot is a PIE executable, it makes heavy use of
> R_ARM_RELATIVE/R_AARCH64_RELATIVE relocations, which are not symbol
> based, but simply point to places in the binary such as your init
> array) where the offset between the link time and load time addresses
> needs to be taken into account. For this type of relocation (and since
> the u-boot link time base address is 0x0), the addends happen to
> coincide with the actual addresses of the functions. These relocations
> are applied at runtime by u-boot itself, since it moves itself to the
> top of DRAM right after boot.
>
> In the AArch64 case, these addends are stored in the relocation
> entries themselves. If you dump the relocations form the u-boot binary
> using readelf, you will probably find the values you are looking for.
Thanks a lot for the pointer, Ard. With your hints, I'm looking at
U-Boot commit 8137af19e75a (arm64: Add tool to statically apply RELA
relocations) and getting the idea how this thing works on arm64.
Thanks again.
Shawn
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] aarch64-linux-gnu-objdump gives all zeros in init_sequence_f[]
2015-11-12 7:20 ` [U-Boot] " Albert ARIBAUD
@ 2015-11-12 8:15 ` Shawn Guo
0 siblings, 0 replies; 5+ messages in thread
From: Shawn Guo @ 2015-11-12 8:15 UTC (permalink / raw)
To: linux-arm-kernel
Hi Albert,
On Thu, Nov 12, 2015 at 08:20:18AM +0100, Albert ARIBAUD wrote:
> Can you provide the target name and commit ID that you are building,
> s well as the version of the toolchain that you are building with?
> Without being able to reproduce your issue, it's kind of hard to
> diagnose it.
With the explanation from Ard, I understand the thing now. But thanks
for the reply anyway.
Shawn
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-11-12 8:15 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-11-12 5:43 aarch64-linux-gnu-objdump gives all zeros in init_sequence_f[] Shawn Guo
2015-11-12 6:36 ` Ard Biesheuvel
2015-11-12 8:12 ` Shawn Guo
2015-11-12 7:20 ` [U-Boot] " Albert ARIBAUD
2015-11-12 8:15 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).