From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 3/6] dt/bindings: add bindings for optee
Date: Mon, 16 Nov 2015 11:01:10 -0600 [thread overview]
Message-ID: <20151116170109.GA20076@rob-hp-laptop> (raw)
In-Reply-To: <1446106888-8983-4-git-send-email-jens.wiklander@linaro.org>
On Thu, Oct 29, 2015 at 09:21:25AM +0100, Jens Wiklander wrote:
> Introduces optee prefix and adds bindings for ARM TrustZone based OP-TEE
> implementation.
>
> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
> ---
> .../bindings/arm/firmware/optee,optee-tz.txt | 29 ++++++++++++++++++++++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> 2 files changed, 30 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/firmware/optee,optee-tz.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/firmware/optee,optee-tz.txt b/Documentation/devicetree/bindings/arm/firmware/optee,optee-tz.txt
> new file mode 100644
> index 0000000..0a8ed0d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/firmware/optee,optee-tz.txt
> @@ -0,0 +1,29 @@
> +OP-TEE Device Tree Bindings
> +
> +OP-TEE is a piece of software using hardware features to provide a Trusted
> +Execution Environment. The security can be provided with ARM TrustZone, but
> +also by virtualization or a separate chip. As there's no single OP-TEE
> +vendor we're using "optee" as the first part of compatible property,
> +indicating the OP-TEE protocol is used when communicating with the secure
> +world.
> +
> +* OP-TEE based on ARM TrustZone required properties:
> +
> +- compatible : should contain "optee,optee-tz"
I would leave off optee as a vendor. Different implementations by
vendors should then add their vendor prefix as they all have the chance
to screw-up something. I suppose we could do "linaro" as the reference
implementation.
> +
> +- method : The method of calling the OP-TEE Trusted OS. Permitted
> + values are:
> +
> + "smc" : SMC #0, with the register assignments specified
> + in drivers/tee/optee/optee_smc.h
> +
> + "hvc" : HVC #0, with the register assignments specified
> + in drivers/tee/optee/optee_smc.h
The use here would be a guest VM calling thru to hypervisor and then
hypervisor calling optee?
> +
> +
> +
> +Example:
> + optee {
This should go under a /firmware node similar to
Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt.
Rob
next prev parent reply other threads:[~2015-11-16 17:01 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-29 8:21 [PATCH v6 0/6] generic TEE subsystem Jens Wiklander
2015-10-29 8:21 ` [PATCH v6 1/6] arm/arm64: add smccc Jens Wiklander
2015-11-02 11:51 ` Will Deacon
2015-11-02 13:56 ` Jens Wiklander
2015-11-02 14:03 ` Mark Rutland
2015-11-02 14:45 ` Will Deacon
2015-10-29 8:21 ` [PATCH v6 2/6] drivers: psci: replace psci firmware calls Jens Wiklander
2015-11-02 11:55 ` Will Deacon
2015-11-02 13:08 ` Jens Wiklander
2015-11-02 13:46 ` Will Deacon
2015-10-29 8:21 ` [PATCH v6 3/6] dt/bindings: add bindings for optee Jens Wiklander
2015-11-16 17:01 ` Rob Herring [this message]
2015-11-19 9:18 ` Jens Wiklander
2015-11-19 14:30 ` Rob Herring
2015-10-29 8:21 ` [PATCH v6 4/6] tee: generic TEE subsystem Jens Wiklander
2015-10-29 8:21 ` [PATCH v6 5/6] tee: add OP-TEE driver Jens Wiklander
2015-10-29 8:21 ` [PATCH v6 6/6] Documentation: tee subsystem and op-tee driver Jens Wiklander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151116170109.GA20076@rob-hp-laptop \
--to=robh@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).