From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@arm.linux.org.uk (Russell King - ARM Linux) Date: Mon, 16 Nov 2015 18:02:11 +0000 Subject: [PATCH 01/13 v2] ARM: add some L220 DT settings In-Reply-To: <20151116174825.GA14634@rob-hp-laptop> References: <1445521493-21509-1-git-send-email-linus.walleij@linaro.org> <20151116174825.GA14634@rob-hp-laptop> Message-ID: <20151116180210.GV8644@n2100.arm.linux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Nov 16, 2015 at 11:48:25AM -0600, Rob Herring wrote: > On Thu, Oct 22, 2015 at 03:44:53PM +0200, Linus Walleij wrote: > > The RealView ARM11MPCore enables parity, eventmon and shared > > override in the cache controller through its current boardfile, > > but the code and DT bindings for the ARM L220 is currently > > lacking the ability to set this up from DT. Add the required > > bool parameters for parity and shared override, but keep > > eventmon out of it: this should be enabled by the event > > monitor code. > > > > Cc: devicetree at vger.kernel.org > > Signed-off-by: Linus Walleij > > --- > > ChangeLog v1->v2: > > - Drop event monitor setup. > > - Support both parity enable and disable: could be useful. > > --- > > Documentation/devicetree/bindings/arm/l2cc.txt | 10 ++++++---- > > Acked-by: Rob Herring Thanks Rob, this has been in the patch system since the 27th October, but as DT people hadn't acked it, I didn't take it into my tree. We're now too late for this merge window, so it's going to wait for the 4.5 window. -- FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.