From mboxrd@z Thu Jan 1 00:00:00 1970 From: helgaas@kernel.org (Bjorn Helgaas) Date: Tue, 24 Nov 2015 17:43:19 -0600 Subject: [PATCH] ARM: keystone: dts: add PCI serdes driver bindings In-Reply-To: <1444919230-30932-1-git-send-email-w-kwok2@ti.com> References: <1444919230-30932-1-git-send-email-w-kwok2@ti.com> Message-ID: <20151124234319.GG17377@localhost> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi WingMan, On Thu, Oct 15, 2015 at 10:27:10AM -0400, WingMan Kwok wrote: > This patch adds the required PCI serdes bindings whcih can then be > enabled by setting the corresponding statuses to "ok" in order to > configure and start the PCI serdes. > > This patch depends on the updates to the Keystone PCIe host driver > and common serdes driver patch series that is submitted separately. > > Signed-off-by: WingMan Kwok Is there a reason to separate the binding update from the PCIe host driver update? It would make sense to me to have them in the same patch to make it easier to keep them consistent. Bjorn > --- > arch/arm/boot/dts/k2e.dtsi | 21 +++++++++++++++++++++ > arch/arm/boot/dts/keystone.dtsi | 21 +++++++++++++++++++++ > 2 files changed, 42 insertions(+) > > diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi > index 675fb8e..3b36575 100644 > --- a/arch/arm/boot/dts/k2e.dtsi > +++ b/arch/arm/boot/dts/k2e.dtsi > @@ -86,6 +86,16 @@ > gpio,syscon-dev = <&devctrl 0x240>; > }; > > + pcie1_phy: pciephy at 2326000 { > + #phy-cells = <0>; > + compatible = "ti,keystone-serdes-pcie"; > + reg = <0x02326000 0x4000>; > + reg-names = "serdes"; > + link-rate-kbps = <5000000>; > + num-lanes = <2>; > + status = "disabled"; > + }; > + > pcie1: pcie at 21020000 { > compatible = "ti,keystone-pcie","snps,dw-pcie"; > clocks = <&clkpcie1>; > @@ -130,6 +140,17 @@ > , > ; > }; > + > + /* PCIE phy */ > + serdeses { > + #address-cells = <1>; > + #size-cells = <0>; > + serdes at 0 { > + reg = <0>; > + phys = <&pcie1_phy>; > + }; > + }; > + > }; > > mdio: mdio at 24200f00 { > diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi > index 72816d6..6566cc4 100644 > --- a/arch/arm/boot/dts/keystone.dtsi > +++ b/arch/arm/boot/dts/keystone.dtsi > @@ -275,6 +275,16 @@ > ti,syscon-dev = <&devctrl 0x2a0>; > }; > > + pcie0_phy: pciephy at 2320000 { > + #phy-cells = <0>; > + compatible = "ti,keystone-serdes-pcie"; > + reg = <0x02320000 0x4000>; > + reg-names = "serdes"; > + link-rate-kbps = <5000000>; > + num-lanes = <2>; > + status = "disabled"; > + }; > + > pcie0: pcie at 21800000 { > compatible = "ti,keystone-pcie", "snps,dw-pcie"; > clocks = <&clkpcie>; > @@ -319,6 +329,17 @@ > , > ; > }; > + > + /* PCIE phy */ > + serdeses { > + #address-cells = <1>; > + #size-cells = <0>; > + serdes at 0 { > + reg = <0>; > + phys = <&pcie0_phy>; > + }; > + }; > + > }; > }; > }; > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html