public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND v4 1/6] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver
Date: Tue, 24 Nov 2015 18:07:27 -0600	[thread overview]
Message-ID: <20151125000727.GA26709@rob-hp-laptop> (raw)
In-Reply-To: <1448370862-19120-2-git-send-email-lee.jones@linaro.org>

On Tue, Nov 24, 2015 at 01:14:17PM +0000, Lee Jones wrote:
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  .../devicetree/bindings/remoteproc/st-rproc.txt    | 41 ++++++++++++++++++++++

Acked-by: Rob Herring <robh@kernel.org>

>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> new file mode 100644
> index 0000000..1031bcd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> @@ -0,0 +1,41 @@
> +STMicroelectronics Co-Processor Bindings
> +----------------------------------------
> +
> +This binding provides support for adjunct processors found on ST SoCs.
> +
> +Co-processors can be controlled from the bootloader or the primary OS. If
> +the bootloader starts a co-processor, the primary OS must detect its state
> +and act accordingly.
> +
> +Required properties:
> +- compatible		Should be one of:
> +				"st,st231-rproc"
> +				"st,st40-rproc"
> +- memory-region		Reserved memory (See: ../reserved-memory/reserved-memory.txt)
> +- resets		Reset lines (See: ../reset/reset.txt)
> +- reset-names		Must be "sw_reset" and "pwr_reset"
> +- clocks		Clock for co-processor (See: ../clock/clock-bindings.txt)
> +- clock-frequency	Clock frequency to set co-processor at if the bootloader
> +			hasn't already done so
> +- st,syscfg		System configuration register which holds the boot vector
> +			for the co-processor
> +				1st cell: Phandle to syscon block
> +				2nd cell: Boot vector register offset
> +
> +Example:
> +
> +	audio_reserved: rproc at 42000000 {
> +		compatible = "shared-dma-pool";
> +		reg = <0x42000000 0x01000000>;
> +		no-map;
> +	};
> +
> +	st231-audio {
> +		compatible	= "st,st231-rproc";
> +		memory-region	= <&audio_reserved>;
> +		resets		= <&softreset STIH407_ST231_AUD_SOFTRESET>;
> +		reset-names	= "sw_reset";
> +		clocks		= <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
> +		clock-frequency	= <600000000>;
> +		st,syscfg	= <&syscfg_core 0x228>;
> +	};
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2015-11-25  0:07 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-24 13:14 [RESEND v4 0/6] remoteproc: Add driver for STMicroelectronics platforms Lee Jones
2015-11-24 13:14 ` [RESEND v4 1/6] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver Lee Jones
2015-11-25  0:07   ` Rob Herring [this message]
2015-12-28 18:33   ` Bjorn Andersson
2015-11-24 13:14 ` [RESEND v4 2/6] remoteproc: debugfs: Add ability to boot remote processor using debugfs Lee Jones
2015-11-27 17:00   ` Bjorn Andersson
2015-12-03 12:26     ` Lee Jones
2015-12-03 12:49       ` Arnd Bergmann
2015-12-03 13:03         ` Lee Jones
2015-12-03 13:19           ` Arnd Bergmann
2015-12-03 17:28             ` Lee Jones
2015-12-03 21:12               ` Arnd Bergmann
2015-12-03 21:22                 ` Bjorn Andersson
2015-12-04  8:24                 ` Lee Jones
2015-12-28 18:38                   ` Bjorn Andersson
2016-01-12 10:53                     ` Lee Jones
2015-11-24 13:14 ` [RESEND v4 3/6] remoteproc: Supply controller driver for ST's Remote Processors Lee Jones
2015-12-28 18:33   ` Bjorn Andersson
2015-11-24 13:14 ` [RESEND v4 4/6] MAINTAINERS: Add ST's Remote Processor Driver to ARM/STI ARCHITECTURE Lee Jones
2015-11-24 13:14 ` [RESEND v4 5/6] ARM: STiH407: Add nodes for RemoteProc Lee Jones
2015-11-24 13:14 ` [RESEND v4 6/6] ARM: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory Lee Jones
2015-11-26  8:45 ` [RESEND v4 0/6] remoteproc: Add driver for STMicroelectronics platforms Ohad Ben-Cohen
2015-11-26  9:10   ` Lee Jones
2015-11-26  9:32     ` Ohad Ben-Cohen
2015-12-28 18:41       ` Bjorn Andersson
2015-12-29  8:23         ` Ohad Ben-Cohen
2016-01-12 12:30           ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151125000727.GA26709@rob-hp-laptop \
    --to=robh@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox