[PATCH v4 0/3] ARM: OMAP2+ McASP(3) support for DRA7xx family

[tony@atomide.com (Tony Lindgren)]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [151123 23:39]:
> Tony,
> 
> On 11/12/2015 08:00 PM, Tony Lindgren wrote:
> > * Peter Ujfalusi <peter.ujfalusi@ti.com> [151111 23:33]:
> >> Hi Tony,
> >>
> >> Changes since v3:
> >> - rebased on mainline's HEAD
> >> - Added Tested-by from Felipe
> >> - Added Acked-by from Paul for the hwmod patches
> >>
> >> Changes since v2:
> >> - DTS patch added which is needed because of the clock handling changes
> >>
> >> Felip Balbi reported that linux-next is broken right now since the DTS part of
> >> the earlier series has been applied, but we do not have the mcasp hwmod in the
> >> kernel:
> >> ...
> >> [    0.181029] platform 48468000.mcasp: Cannot lookup hwmod 'mcasp3'
> >> ...
> >> [    6.121072] davinci-mcasp 48468000.mcasp: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info
> >> [    6.130790] ------------[ cut here ]------------
> >> [    6.135643] WARNING: CPU: 0 PID: 244 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x34c()
> >> [    6.145576] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER2_P3 (Read): Data Access in User mode during Functional access
> > 
> > 
> > Thanks applying all three into omap-for-v4.4/fixes.
> 
> Do you know when these patches are going to be merged to mainline? 4.4-rc2 is
> out, but it does not include them.

Sorry for the delays, hoping to send out the fixes today or Friday after
scanning emails one more time for more fixes.

Regards,

Tony