linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: dt: mvebu: ix4-300d: Cleanup NAND partition ranges
Date: Sat, 28 Nov 2015 18:01:55 +0100	[thread overview]
Message-ID: <20151128170155.GI32356@lunn.ch> (raw)
In-Reply-To: <1448709248-21177-4-git-send-email-sebastian.hesselbarth@gmail.com>

On Sat, Nov 28, 2015 at 12:14:07PM +0100, Sebastian Hesselbarth wrote:
> Prefix all partition reg properties to 32-bit to ease readability.
> While at it, also remove a stale x in front of boot partition
> offset and make some upper-case hex numbers lower-case.
> 
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Acked-by: Andrew Lunn <andrew@lunn.ch>

	  Andrew

> ---
> Cc: Jason Cooper <jason@lakedaemon.net> 
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Gregory Clement <gregory.clement@free-electrons.com> 
> Cc: Rob Herring <robh+dt@kernel.org> 
> Cc: Pawel Moll <pawel.moll@arm.com> 
> Cc: Mark Rutland <mark.rutland@arm.com> 
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> 
> Cc: Kumar Gala <galak@codeaurora.org> 
> Cc: Russell King <linux@arm.linux.org.uk> 
> Cc: Benoit Masson <yahoo@perenite.com>
> Cc: linux-arm-kernel at lists.infradead.org 
> Cc: devicetree at vger.kernel.org 
> Cc: linux-kernel at vger.kernel.org 
> ---
>  arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
> index 76781fd18624..13cf69a8d0fb 100644
> --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
> +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
> @@ -157,35 +157,35 @@
>  
>  					partition at 0 {
>  						label = "u-boot";
> -						reg = <0x0000000 0xe0000>;
> +						reg = <0x00000000 0x000e0000>;
>  						read-only;
>  					};
>  
>  					partition at e0000 {
>  						label = "u-boot-env";
> -						reg = <0xe0000 0x20000>;
> +						reg = <0x000e0000 0x00020000>;
>  						read-only;
>  					};
>  
>  					partition at 100000 {
>  						label = "u-boot-env2";
> -						reg = <0x100000 0x20000>;
> +						reg = <0x00100000 0x00020000>;
>  						read-only;
>  					};
>  
>  					partition at 120000 {
>  						label = "zImage";
> -						reg = <0x120000 0x400000>;
> +						reg = <0x00120000 0x00400000>;
>  					};
>  
>  					partition at 520000 {
>  						label = "initrd";
> -						reg = <0x520000 0x400000>;
> +						reg = <0x00520000 0x00400000>;
>  					};
>  
> -					partition at xE00000 {
> +					partition at e00000 {
>  						label = "boot";
> -						reg = <0xE00000 0x3F200000>;
> +						reg = <0x00e00000 0x3f200000>;
>  					};
>  				};
>  			};
> -- 
> 2.1.4
> 

  reply	other threads:[~2015-11-28 17:01 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-28 11:14 [PATCH 0/4] ARM: dt: mvebu: ix4-300d: NAND cleanup and ECC Sebastian Hesselbarth
2015-11-28 11:14 ` [PATCH 1/4] ARM: dt: mvebu: ix4-300d: remove whole flash partition Sebastian Hesselbarth
2015-11-28 16:52   ` Andrew Lunn
2015-11-28 17:38     ` Sebastian Hesselbarth
2015-11-28 20:32       ` Benoit Masson
2015-11-28 21:11   ` Andrew Lunn
2015-11-30 14:16     ` Gregory CLEMENT
2015-11-28 11:14 ` [PATCH 2/4] ARM: dt: mvebu: ix4-300d: move partitions to partition sub-node Sebastian Hesselbarth
2015-11-28 17:00   ` Andrew Lunn
2015-11-28 17:38     ` Sebastian Hesselbarth
2015-11-30 14:17   ` Gregory CLEMENT
2015-11-28 11:14 ` [PATCH 3/4] ARM: dt: mvebu: ix4-300d: Cleanup NAND partition ranges Sebastian Hesselbarth
2015-11-28 17:01   ` Andrew Lunn [this message]
2015-11-30 14:20     ` Gregory CLEMENT
2015-11-28 11:14 ` [PATCH 4/4] ARM: dt: mvebu: ix4-300d: Add ECC properties to NAND flash Sebastian Hesselbarth
2015-11-28 17:02   ` Andrew Lunn
2015-11-29 14:35   ` Thomas Petazzoni
2015-11-30  8:30     ` Sebastian Hesselbarth
2015-11-30 14:22       ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151128170155.GI32356@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).