[PATCH] clk: imx5: ipu_di_sel clocks can set parent rates

[shawnguo@kernel.org (Shawn Guo)]

On Thu, Nov 26, 2015 at 04:10:20PM +0100, linux-kernel-dev at beckhoff.com wrote:
> From: Patrick Br?nn <p.bruenn@beckhoff.com>
> 
> To obtain exact pixel clocks, allow the DI clock selectors to influence
> the PLLs that they are derived from.
> 
> Commit 4591b13289b54fb5cbce84ee170f7390c576ef8f did this for i.MX6.
> Port it to enable high display resolutions on i.MX53 based platforms
> such as CX9020 Industrial PC, too.
> 
> Signed-off-by: Patrick Br?nn <p.bruenn@beckhoff.com>

Please resend the patch to have clk maintainers and list on copy.

M:      Michael Turquette <mturquette@baylibre.com>
M:      Stephen Boyd <sboyd@codeaurora.org>
L:      linux-clk at vger.kernel.org

You should have been told that if you run get_maintainer.pl on the
patch.

Shawn

> ---
>  drivers/clk/imx/clk-imx51-imx53.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-imx51-imx53.c b/drivers/clk/imx/clk-imx51-imx53.c
> index c677034..29d4c44 100644
> --- a/drivers/clk/imx/clk-imx51-imx53.c
> +++ b/drivers/clk/imx/clk-imx51-imx53.c
> @@ -519,10 +519,10 @@ static void __init mx53_clocks_init(struct device_node *np)
>  						mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
>  	clk[IMX5_CLK_LDB_DI0_GATE]	= imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
>  	clk[IMX5_CLK_LDB_DI1_GATE]	= imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
> -	clk[IMX5_CLK_IPU_DI0_SEL]	= imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
> -						mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
> -	clk[IMX5_CLK_IPU_DI1_SEL]	= imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
> -						mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
> +	clk[IMX5_CLK_IPU_DI0_SEL]	= imx_clk_mux_flags("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
> +						mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel), CLK_SET_RATE_PARENT);
> +	clk[IMX5_CLK_IPU_DI1_SEL]	= imx_clk_mux_flags("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
> +						mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel), CLK_SET_RATE_PARENT);
>  	clk[IMX5_CLK_TVE_EXT_SEL]	= imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
>  						mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
>  	clk[IMX5_CLK_TVE_GATE]		= imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
> -- 
> 1.9.1
> 
>