From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] dts/ls2080a: Update PCIe compatible
Date: Fri, 4 Dec 2015 10:22:43 -0600 [thread overview]
Message-ID: <20151204162243.GA12415@rob-hp-laptop> (raw)
In-Reply-To: <1449224417-20753-1-git-send-email-Mingkai.Hu@freescale.com>
On Fri, Dec 04, 2015 at 06:20:17PM +0800, Mingkai Hu wrote:
> From: Minghuan Lian <Minghuan.Lian@freescale.com>
>
> The patch adds LS2085a to PCIe compatible to fix the compatibility
> issue when using firmware with LS2085a compatible property.
>
> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
> ---
> v2 change:
> - Rebased to latest kernel base
How about implementing my comments on v1, too?
>
> Documentation/devicetree/bindings/pci/layerscape-pci.txt | 1 +
> arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 12 ++++++++----
> 2 files changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index e376785..4600007 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -15,6 +15,7 @@ Required properties:
> - compatible: should contain the platform identifier such as:
> "fsl,ls1021a-pcie", "snps,dw-pcie"
> "fsl,ls2080a-pcie", "snps,dw-pcie"
> + "fsl,ls2085a-pcie", "snps,dw-pcie"
> - reg: base addresses and lengths of the PCIe controller
> - interrupts: A list of interrupt outputs of the controller. Must contain an
> entry for each entry in the interrupt-names property.
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> index e81cd48..3821bb1 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
> @@ -383,7 +383,8 @@
> };
>
> pcie at 3400000 {
> - compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
> + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
> + "snps,dw-pcie";
> reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
> 0x10 0x00000000 0x0 0x00002000>; /* configuration space */
> reg-names = "regs", "config";
> @@ -406,7 +407,8 @@
> };
>
> pcie at 3500000 {
> - compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
> + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
> + "snps,dw-pcie";
> reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
> 0x12 0x00000000 0x0 0x00002000>; /* configuration space */
> reg-names = "regs", "config";
> @@ -429,7 +431,8 @@
> };
>
> pcie at 3600000 {
> - compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
> + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
> + "snps,dw-pcie";
> reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
> 0x14 0x00000000 0x0 0x00002000>; /* configuration space */
> reg-names = "regs", "config";
> @@ -452,7 +455,8 @@
> };
>
> pcie at 3700000 {
> - compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
> + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
> + "snps,dw-pcie";
> reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
> 0x16 0x00000000 0x0 0x00002000>; /* configuration space */
> reg-names = "regs", "config";
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2015-12-04 16:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-04 10:20 [PATCH v2] dts/ls2080a: Update PCIe compatible Mingkai Hu
2015-12-04 16:22 ` Rob Herring [this message]
2015-12-07 8:44 ` Hu Vincent
2016-01-18 8:09 ` Li Yang
2015-12-15 2:01 ` Hu Vincent
2015-12-15 2:02 ` Scott Wood
2015-12-15 2:05 ` Hu Vincent
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151204162243.GA12415@rob-hp-laptop \
--to=robh@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox