Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 2/5] dt-bindings: mediatek: Add smi dts binding
Date: Tue, 8 Dec 2015 21:35:03 -0600	[thread overview]
Message-ID: <20151209033503.GA14549@rob-hp-laptop> (raw)
In-Reply-To: <1449568153-15643-3-git-send-email-yong.wu@mediatek.com>

On Tue, Dec 08, 2015 at 05:49:10PM +0800, Yong Wu wrote:
> This patch add smi binding document.
> 
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  .../memory-controllers/mediatek,smi-common.txt     | 24 +++++++++++++++++++++
>  .../memory-controllers/mediatek,smi-larb.txt       | 25 ++++++++++++++++++++++
>  2 files changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> new file mode 100644
> index 0000000..06a83ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> @@ -0,0 +1,24 @@
> +SMI (Smart Multimedia Interface) Common
> +
> +The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> +
> +Required properties:
> +- compatible : must be "mediatek,mt8173-smi-common"
> +- reg : the register and size of the SMI block.
> +- power-domains : a phandle to the power domain of this local arbiter.
> +- clocks : Must contain an entry for each entry in clock-names.
> +- clock-names : must contain 2 entries, as follows:
> +  - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> +	    the register.
> +  - "smi" : It's the clock for transfer data and command.
> +  They may be the same if both source clocks are the same.
> +
> +Example:
> +	smi_common: smi at 14022000 {
> +		compatible = "mediatek,mt8173-smi-common";
> +		reg = <0 0x14022000 0 0x1000>;
> +		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> +		clocks = <&mmsys CLK_MM_SMI_COMMON>,
> +			 <&mmsys CLK_MM_SMI_COMMON>;
> +		clock-names = "apb", "smi";
> +	};
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> new file mode 100644
> index 0000000..55ff3b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> @@ -0,0 +1,25 @@
> +SMI (Smart Multimedia Interface) Local Arbiter
> +
> +The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> +
> +Required properties:
> +- compatible : must be "mediatek,mt8173-smi-larb"
> +- reg : the register and size of this local arbiter.
> +- mediatek,smi : a phandle to the smi_common node.
> +- power-domains : a phandle to the power domain of this local arbiter.
> +- clocks : Must contain an entry for each entry in clock-names.
> +- clock-names: must contain 2 entries, as follows:
> +  - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> +	    the register.
> +  - "smi" : It's the clock for transfer data and command.
> +
> +Example:
> +	larb1: larb at 16010000 {
> +		compatible = "mediatek,mt8173-smi-larb";
> +		reg = <0 0x16010000 0 0x1000>;
> +		mediatek,smi = <&smi_common>;
> +		power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> +		clocks = <&vdecsys CLK_VDEC_CKEN>,
> +			 <&vdecsys CLK_VDEC_LARB_CKEN>;
> +		clock-names = "apb", "smi";
> +	};
> -- 
> 1.8.1.1.dirty
> 

  reply	other threads:[~2015-12-09  3:35 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-08  9:49 [PATCH v6 0/5] MT8173 IOMMU SUPPORT Yong Wu
2015-12-08  9:49 ` [PATCH v6 1/5] dt-bindings: iommu: Add binding for mediatek IOMMU Yong Wu
2015-12-09  3:33   ` Rob Herring
2015-12-09  6:55     ` Yong Wu
2015-12-08  9:49 ` [PATCH v6 2/5] dt-bindings: mediatek: Add smi dts binding Yong Wu
2015-12-09  3:35   ` Rob Herring [this message]
2015-12-08  9:49 ` [PATCH v6 3/5] memory: mediatek: Add SMI driver Yong Wu
2015-12-11  7:22   ` Yong Wu
2015-12-14 18:18   ` Matthias Brugger
2015-12-15  2:38     ` Yong Wu
2015-12-15  5:45       ` Daniel Kurtz
2015-12-16  6:00         ` Yong Wu
2015-12-08  9:49 ` [PATCH v6 4/5] iommu/mediatek: Add mt8173 IOMMU driver Yong Wu
2015-12-08 10:32   ` kbuild test robot
2015-12-14 14:16   ` Joerg Roedel
2015-12-15  3:28     ` Yong Wu
2015-12-15 12:37       ` Robin Murphy
2015-12-16  5:59         ` Yong Wu
2015-12-16 12:48           ` Robin Murphy
2015-12-17  3:12             ` Yong Wu
2015-12-16 15:15         ` Joerg Roedel
2015-12-14 18:19   ` Matthias Brugger
2015-12-15  2:40     ` Yong Wu
2015-12-08  9:49 ` [PATCH v6 5/5] dts: mt8173: Add iommu/smi nodes for mt8173 Yong Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151209033503.GA14549@rob-hp-laptop \
    --to=robh@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox