From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 1/5] arm-cci: Refactor CCI PMU enable/disable methods
Date: Thu, 10 Dec 2015 15:26:08 +0000 [thread overview]
Message-ID: <20151210152608.GC495@leverpostej> (raw)
In-Reply-To: <1447783407-18027-2-git-send-email-suzuki.poulose@arm.com>
On Tue, Nov 17, 2015 at 06:03:23PM +0000, Suzuki K. Poulose wrote:
> This patch refactors the CCI PMU driver code a little bit to
> make it easier share the code for enabling/disabling the CCI
> PMU. This will be used by the hooks to work around the special cases
> where writing to a counter is not always that easy(e.g, CCI-500)
>
> No functional changes.
Looks sensible to me:
Acked-by: Mark Rutland <mark.rutland@arm.com>
Mark.
> Cc: Punit Agrawal <punit.agrawal@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
> ---
> drivers/bus/arm-cci.c | 32 ++++++++++++++++++++++----------
> 1 file changed, 22 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
> index ee47e6b..f5793b9 100644
> --- a/drivers/bus/arm-cci.c
> +++ b/drivers/bus/arm-cci.c
> @@ -667,6 +667,26 @@ static u32 pmu_get_max_counters(void)
> CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
> }
>
> +/* Should be called with cci_pmu->hw_events->pmu_lock held */
> +static void __cci_pmu_enable(void)
> +{
> + u32 val;
> +
> + /* Enable all the PMU counters. */
> + val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
> + writel(val, cci_ctrl_base + CCI_PMCR);
> +}
> +
> +/* Should be called with cci_pmu->hw_events->pmu_lock held */
> +static void __cci_pmu_disable(void)
> +{
> + u32 val;
> +
> + /* Disable all the PMU counters. */
> + val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
> + writel(val, cci_ctrl_base + CCI_PMCR);
> +}
> +
> static int pmu_get_event_idx(struct cci_pmu_hw_events *hw, struct perf_event *event)
> {
> struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
> @@ -880,16 +900,12 @@ static void cci_pmu_enable(struct pmu *pmu)
> struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
> int enabled = bitmap_weight(hw_events->used_mask, cci_pmu->num_cntrs);
> unsigned long flags;
> - u32 val;
>
> if (!enabled)
> return;
>
> raw_spin_lock_irqsave(&hw_events->pmu_lock, flags);
> -
> - /* Enable all the PMU counters. */
> - val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
> - writel(val, cci_ctrl_base + CCI_PMCR);
> + __cci_pmu_enable();
> raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
>
> }
> @@ -899,13 +915,9 @@ static void cci_pmu_disable(struct pmu *pmu)
> struct cci_pmu *cci_pmu = to_cci_pmu(pmu);
> struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
> unsigned long flags;
> - u32 val;
>
> raw_spin_lock_irqsave(&hw_events->pmu_lock, flags);
> -
> - /* Disable all the PMU counters. */
> - val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
> - writel(val, cci_ctrl_base + CCI_PMCR);
> + __cci_pmu_disable();
> raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
> }
>
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2015-12-10 15:26 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 18:03 [PATCHv3 0/5] arm-cci500: Workaround pmu_event_set_period Suzuki K. Poulose
2015-11-17 18:03 ` [PATCHv3 1/5] arm-cci: Refactor CCI PMU enable/disable methods Suzuki K. Poulose
2015-12-10 15:26 ` Mark Rutland [this message]
2015-11-17 18:03 ` [PATCHv3 2/5] arm-cci: Get the status of a counter Suzuki K. Poulose
2015-12-10 15:33 ` Mark Rutland
2015-11-17 18:03 ` [PATCHv3 3/5] arm-cci: Add routines to enable/disable all counters Suzuki K. Poulose
2015-12-10 15:32 ` Mark Rutland
2015-12-10 15:42 ` Suzuki K. Poulose
2015-12-10 15:47 ` Mark Rutland
2015-11-17 18:03 ` [PATCHv3 4/5] arm-cci: Add hooks for pmu_write_counter Suzuki K. Poulose
2015-11-17 18:03 ` [PATCHv3 5/5] arm-cci: CCI-500: Work around PMU counter writes Suzuki K. Poulose
2015-12-10 15:42 ` Mark Rutland
2015-12-11 11:28 ` Suzuki K. Poulose
2015-12-11 12:10 ` Peter Zijlstra
2015-12-11 12:14 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151210152608.GC495@leverpostej \
--to=mark.rutland@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).