From mboxrd@z Thu Jan 1 00:00:00 1970 From: boris.brezillon@free-electrons.com (Boris Brezillon) Date: Fri, 11 Dec 2015 18:08:55 +0100 Subject: [PATCH v5 01/58] mtd: nand: denali: add missing nand_release() call in denali_remove() In-Reply-To: References: <1449734442-18672-2-git-send-email-boris.brezillon@free-electrons.com> <1449842554-29898-1-git-send-email-boris.brezillon@free-electrons.com> <20151211161008.056a0f47@bbrezillon> Message-ID: <20151211180855.47c95df2@bbrezillon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Dinh, On Fri, 11 Dec 2015 10:50:21 -0600 Dinh Nguyen wrote: > Hi Boris, > > On Fri, Dec 11, 2015 at 9:10 AM, Boris Brezillon > wrote: > > + Dinh (who made commit 2a0a288ec258) > > > > Also added back the Fixes tag. > > > > On Fri, 11 Dec 2015 15:02:34 +0100 > > Boris Brezillon wrote: > > > >> Unregister the NAND device from the NAND subsystem when removing a denali > >> NAND controller, otherwise the MTD attached to the NAND device is still > >> exposed by the MTD layer, and accesses to this device will likely crash > >> the system. > >> > >> Signed-off-by: Boris Brezillon > > > > Fixes: 2a0a288ec258 ("mtd: denali: split the generic driver and PCI layer") > > > >> --- > >> Changes since v4: > >> - remove Cc stable and fixes tags > >> - calculate the dma buffer size before calling nand_release() > >> > >> drivers/mtd/nand/denali.c | 6 ++++-- > >> 1 file changed, 4 insertions(+), 2 deletions(-) > >> > >> diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c > >> index 67eb2be..fdfea05 100644 > >> --- a/drivers/mtd/nand/denali.c > >> +++ b/drivers/mtd/nand/denali.c > >> @@ -1622,9 +1622,11 @@ EXPORT_SYMBOL(denali_init); > >> /* driver exit point */ > >> void denali_remove(struct denali_nand_info *denali) > >> { > >> + int bufsize = denali->mtd.writesize + denali->mtd.oobsize; > >> + > >> + nand_release(&denali->mtd); > >> denali_irq_cleanup(denali->irq, denali); > >> - dma_unmap_single(denali->dev, denali->buf.dma_buf, > >> - denali->mtd.writesize + denali->mtd.oobsize, > >> + dma_unmap_single(denali->dev, denali->buf.dma_buf, bufsize, > >> DMA_BIDIRECTIONAL); > > Not sure what is the need to add bufsize here, but the commit message > doesn't reflect the change. You were not in Cc of the first version (my fault), but Brian pointed that the mtd fields could be in an unknown state after the nand_release() call (this is currently not the case, but it change in the future). The idea is to pre-compute the DMA buffer size before releasing the mtd/nand device to prevent any future issues. I don't think it is worth mentioning this in the commit message, because these are just implementation details, but I can add the following comment before the bufsize declaration: /* * Pre-compute DMA buffer size to avoid any problems in case * nand_release() ever changes in a way that mtd->writesize and * mtd->oobsize are not reliable after this call. */ What do you think? Best Regards, Boris > > Dinh -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com