From mboxrd@z Thu Jan 1 00:00:00 1970 From: drivshin.allworx@gmail.com (David Rivshin (Allworx)) Date: Fri, 18 Dec 2015 17:06:31 -0500 Subject: [PATCH v2 0/3] drivers: net: cpsw: Fix bugs in fixed-link PHY DT parsing In-Reply-To: <20151218102020.GA1703@dt-ub1404lts.ENTWDOM.local> References: <20151209223115.6c5a400f.drivshin.allworx@gmail.com> <1741588.Ve76Z1ZI87@localhost> <20151217.154508.505711333985621252.davem@davemloft.net> <20151218102020.GA1703@dt-ub1404lts.ENTWDOM.local> Message-ID: <20151218170631.643ead8d.drivshin.allworx@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, 18 Dec 2015 11:20:21 +0100 Daniel Trautmann wrote: > On Thu, Dec 17, 2015 at 03:45:08PM -0500, David Miller wrote: > > From: "David Rivshin (Allworx)" > > Date: Wed, 16 Dec 2015 23:02:08 -0500 > > > > > I have tested on the following hardware configurations: > > > - (EVMSK) dual emac with two real MDIO-connected phys using > > > RGMII-TXID > > > - single emac with fixed-link using RGMII > > > Testing of other CPSW emac configurations that folks may have > > > would be appreciated. > > > > I'm going to wait until some others give some feedback and testing > > results on this one, thanks. > > I can confirm that this patch is working on the following hardware > setup: > - single emac using MII connected with fixed-link to Micrel KSZ8895 > Switch Thanks for testing. I see that Dave applied the series, but just for good measure I'll report that I also tested on: - (BeagleBone-Black) single emac, MII, real 100Mbit PHY