From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v2 2/2] ASoC: atmel-classd: DT binding for PDMIC driver
Date: Fri, 18 Dec 2015 22:17:55 -0600 [thread overview]
Message-ID: <20151219041755.GG14936@rob-hp-laptop> (raw)
In-Reply-To: <1450345800-21299-3-git-send-email-songjun.wu@atmel.com>
On Thu, Dec 17, 2015 at 05:50:00PM +0800, Songjun Wu wrote:
> DT binding documentation for this new ASoC driver.
>
> Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
> ---
>
> Changes in v2: None
>
> .../devicetree/bindings/sound/atmel-pdmic.txt | 55 ++++++++++++++++++++
> 1 file changed, 55 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/atmel-pdmic.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/atmel-pdmic.txt b/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
> new file mode 100644
> index 0000000..e0875f1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
> @@ -0,0 +1,55 @@
> +* Atmel PDMIC driver under ALSA SoC architecture
> +
> +Required properties:
> +- compatible
> + Should be "atmel,sama5d2-pdmic".
> +- reg
> + Should contain PDMIC registers location and length.
> +- interrupts
> + Should contain the IRQ line for the PDMIC.
> +- dmas
> + One DMA specifiers as described in atmel-dma.txt and dma.txt files.
> +- dma-names
> + Must be "rx".
> +- clock-names
> + Required elements:
> + - "pclk" peripheral clock
> + - "gclk" generated clock
> +- clocks
> + Must contain an entry for each required entry in clock-names.
> + Please refer to clock-bindings.txt.
> +- atmel,mic-min-freq
> + The minimal frequency that the micphone supports.
> +- atmel,mic-max-freq
> + The maximal frequency that the micphone supports.
Please append units to these 2 (-hz).
> +Optional properties:
> +- pinctrl-names, pinctrl-0
> + Please refer to pinctrl-bindings.txt.
> +- atmel,model
> + The user-visible name of this sound card.
> + The default value is "PDMIC".
When and why would this be different than the default?
"label" can be used here if this is really needed.
> +- atmel,mic-offset
> + The offset that should be added.
> + The range is from -32768 to 32767.
> + The default value is 0.
> +
> +Example:
> + pdmic at f8018000 {
> + compatible = "atmel,sama5d2-pdmic";
> + reg = <0xf8018000 0x124>;
> + interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
> + | AT91_XDMAC_DT_PERID(50))>;
> + dma-names = "rx";
> + clocks = <&pdmic_clk>, <&pdmic_gclk>;
> + clock-names = "pclk", "gclk";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pdmic_default>;
> + atmel,model = "PDMIC @ sama5d2_xplained";
> + atmel,mic-min-freq = <1000000>;
> + atmel,mic-max-freq = <3246000>;
> + atmel,mic-offset = <0x0>;
> + };
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2015-12-19 4:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 9:49 [RESEND PATCH v2 0/2] ASoC: atmel-pdmic: add driver for Atmel PDMIC Songjun Wu
2015-12-17 9:49 ` [RESEND PATCH v2 1/2] ASoC: atmel-pdmic: add the Pulse Density Modulation Interface Controller Songjun Wu
2015-12-17 9:50 ` [RESEND PATCH v2 2/2] ASoC: atmel-classd: DT binding for PDMIC driver Songjun Wu
2015-12-19 4:17 ` Rob Herring [this message]
[not found] ` <20151219040913.D0F442C02FD@rob-hp-laptop>
2015-12-19 11:30 ` Mark Brown
2015-12-22 18:37 ` Rob Herring
2015-12-22 23:49 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151219041755.GG14936@rob-hp-laptop \
--to=robh@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox