From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Mon, 21 Dec 2015 17:10:30 +0100 Subject: [PATCH 4/5] ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet In-Reply-To: <1450611782-9494-4-git-send-email-hdegoede@redhat.com> References: <1450611782-9494-1-git-send-email-hdegoede@redhat.com> <1450611782-9494-4-git-send-email-hdegoede@redhat.com> Message-ID: <20151221161030.GZ30359@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Dec 20, 2015 at 12:43:01PM +0100, Hans de Goede wrote: > The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet, > featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack. > > Empire Electronix is written on the back of the tablet, the D709 model > info can be found in the about tablet menu in android. > > The PCB has no markings to speak of. > > This dts file does not add support for the ft5x touchscreen found at > i2c bus 1, addr 0x38, irq PG11, because it does not work out of the box. > It seems it has been flashed with the wrong firmware and needs to have > alternative firmware uploaded at boot to make the touchscreen work > properly, when hot-booting from android into an upstream kernel the > touchscreen does work. > > The Memsic MXC622X accelerometer at i2c bus 1, addr 0x15 also is not > enabled as there is no driver for it. > > Signed-off-by: Hans de Goede Applied, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: