From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] ARM: dts: imx7d: sbc-imx7: add basic board support
Date: Tue, 22 Dec 2015 20:19:20 +0800 [thread overview]
Message-ID: <20151222121920.GC26290@tiger> (raw)
In-Reply-To: <1450772120-18131-3-git-send-email-ilya@compulab.co.il>
On Tue, Dec 22, 2015 at 10:15:20AM +0200, Ilya Ledvich wrote:
> diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
> new file mode 100644
> index 0000000..000f5b6
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
> @@ -0,0 +1,44 @@
> +/*
> + * Support for CompuLab SBC-iMX7 Single Board Computer
> + *
> + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
> + * Author: Ilya Ledvich <ilya@compulab.co.il>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + */
> +
> +#include "imx7d-cl-som-imx7.dts"
> +
> +/ {
> + model = "CompuLab SBC-iMX7";
> + compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
> + enable-sdio-wakeup;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + cl-som-imx7 {
This container should be dropped too. Please check my imx/dt branch for
the fixup I made.
Shawn
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX7D_PAD_SD1_CMD__SD1_CMD 0x59
> + MX7D_PAD_SD1_CLK__SD1_CLK 0x19
> + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
> + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
> + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
> + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
> + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
> + MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
> + >;
> + };
> + };
> +};
> --
> 1.9.1
>
>
next prev parent reply other threads:[~2015-12-22 12:19 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-07 7:14 [PATCH 0/8] Add support for CL-SOM-iMX7 and SBC-iMX7 Ilya Ledvich
2015-12-07 7:14 ` [PATCH 1/8] ARM: dts: imx7d: cl-som-imx7: add basic module support Ilya Ledvich
2015-12-08 15:14 ` Rob Herring
2015-12-10 14:01 ` [PATCH v2] " Igor Grinberg
2015-12-14 2:43 ` Shawn Guo
2015-12-16 14:01 ` Igor Grinberg
2015-12-21 6:36 ` Shawn Guo
2015-12-21 8:07 ` Igor Grinberg
2015-12-21 13:54 ` Shawn Guo
2015-12-21 13:59 ` Shawn Guo
2015-12-22 7:38 ` Igor Grinberg
2015-12-07 7:14 ` [PATCH 2/8] ARM: dts: imx7d: cl-som-imx7: add usb otg support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 3/8] ARM: dts: imx7d: cl-som-imx7: add eMMC support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 4/8] ARM: dts: imx7d: cl-som-imx7: add fec1 support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 5/8] ARM: dts: imx7d: cl-som-imx7: add eeprom support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 6/8] ARM: dts: imx7d: cl-som-imx7: add gpio extender support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 7/8] ARM: dts: imx7d: cl-som-imx7: add fec2 support Ilya Ledvich
2015-12-07 7:14 ` [PATCH 8/8] ARM: dts: imx7d: sbc-imx7: add basic board support Ilya Ledvich
2015-12-08 15:16 ` Rob Herring
2015-12-14 2:47 ` [PATCH 0/8] Add support for CL-SOM-iMX7 and SBC-iMX7 Shawn Guo
2015-12-16 14:09 ` Igor Grinberg
2015-12-21 6:41 ` Shawn Guo
2015-12-21 7:54 ` Igor Grinberg
2015-12-22 8:15 ` [PATCH v2 0/2] " Ilya Ledvich
2015-12-22 8:15 ` [PATCH v2 1/2] ARM: dts: imx7d: cl-som-imx7: add basic module support Ilya Ledvich
2015-12-22 12:17 ` Shawn Guo
2015-12-22 14:07 ` Igor Grinberg
2015-12-22 8:15 ` [PATCH v2 2/2] ARM: dts: imx7d: sbc-imx7: add basic board support Ilya Ledvich
2015-12-22 12:19 ` Shawn Guo [this message]
2015-12-22 14:13 ` Igor Grinberg
2015-12-22 12:13 ` [PATCH v2 0/2] Add support for CL-SOM-iMX7 and SBC-iMX7 Shawn Guo
2015-12-22 14:14 ` Igor Grinberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151222121920.GC26290@tiger \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox