[PATCH v5 0/5] Qualcomm PCIe driver and designware fixes

[helgaas@kernel.org (Bjorn Helgaas)]

On Fri, Dec 18, 2015 at 02:38:54PM +0200, Stanimir Varbanov wrote:
> Hi,
> 
> I'm sending v5 with following changes:
> - in 1/5 - replace wmb() call with PCIE_ATU_CR2 register read.
> - in 3/5 - addressed comments from Born Helgaas about usage of a
> standard PCI capabilities register names and rename link training
> function to the way that other Designware based drivers use.
> - in 5/5 - addressed a comment from Bjorn Andersson about regulator
> label duplication.
> 
> Comments are welcome!
> 
> The previous v4 of the patch set can be found at [1].
> 
> regards,
> Stan
> 
> [1] https://lkml.org/lkml/2015/12/3/370
> 
> Stanimir Varbanov (5):
>   PCI: designware: ensure ATU is enabled before IO/conf space accesses
>   DT: PCI: qcom: Document PCIe devicetree bindings
>   PCI: qcom: Add Qualcomm PCIe controller driver
>   ARM: dts: apq8064: add pcie devicetree node
>   ARM: dts: ifc6410: enable pcie dt node for this board
> 
>  .../devicetree/bindings/pci/qcom,pcie.txt          |  233 ++++++++
>  MAINTAINERS                                        |    7 +
>  arch/arm/boot/dts/qcom-apq8064-ifc6410.dts         |   26 +
>  arch/arm/boot/dts/qcom-apq8064.dtsi                |   36 ++
>  drivers/pci/host/Kconfig                           |   10 +
>  drivers/pci/host/Makefile                          |    1 +
>  drivers/pci/host/pcie-designware.c                 |    7 +
>  drivers/pci/host/pcie-qcom.c                       |  617 ++++++++++++++++++++
>  8 files changed, 937 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
>  create mode 100644 drivers/pci/host/pcie-qcom.c

Applied to pci/host-qcom for v4.5, with Pratyush's ack on the first patch.
Thanks!