From: jszhang@marvell.com (Jisheng Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] net: mvneta: mmc: get optional axi clk
Date: Wed, 20 Jan 2016 17:42:23 +0800 [thread overview]
Message-ID: <20160120174223.53ccc36b@xhacker> (raw)
In-Reply-To: <1525e5fba70.2764.107cef0f820c2f5d7b7f41463071c310@gmail.com>
On Wed, 20 Jan 2016 10:31:18 +0100 Sebastian Hesselbarth wrote:
> On January 20, 2016 9:15:22 AM Jisheng Zhang wrote:
>
> > Some platforms may provide more than one clk for the mvneta IP, for
> > example Marvell BG4CT provides "core" clk for the mac core, and
> > "axi" clk for the AXI bus logic. Obviously this "axi" clk also need to
> > be enabled. This patch adds this optional "axi" clk support.
>
> Jisheng,
>
> although I do not expect mvneta to appear on a non-AXI bus
> anytime soon, how about naming the clock "bus" instead?
Good question. IIRC, this IP expects AXI bus, but I'll check with HW people.
Thanks a lot,
Jisheng
>
> If you know the clock is only required for bus master DMA but
> not for register access, "dma" would be an even better name.
>
> Sebastian
>
>
> > Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> > ---
> > drivers/net/ethernet/marvell/mvneta.c | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/marvell/mvneta.c
> > b/drivers/net/ethernet/marvell/mvneta.c
> > index aca0a73..6bb709a 100644
> > --- a/drivers/net/ethernet/marvell/mvneta.c
> > +++ b/drivers/net/ethernet/marvell/mvneta.c
> > @@ -373,6 +373,8 @@ struct mvneta_port {
> >
> > /* Core clock */
> > struct clk *clk;
> > + /* AXI clock */
> > + struct clk *clk_axi;
> > u8 mcast_count[256];
> > u16 tx_ring_size;
> > u16 rx_ring_size;
> > @@ -3615,6 +3617,10 @@ static int mvneta_probe(struct platform_device *pdev)
> >
> > clk_prepare_enable(pp->clk);
> >
> > + pp->clk_axi = devm_clk_get(&pdev->dev, "axi");
> > + if (!IS_ERR(pp->clk_axi))
> > + clk_prepare_enable(pp->clk_axi);
> > +
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > pp->base = devm_ioremap_resource(&pdev->dev, res);
> > if (IS_ERR(pp->base)) {
> > @@ -3727,6 +3733,7 @@ err_free_ports:
> > free_percpu(pp->ports);
> > err_clk:
> > clk_disable_unprepare(pp->clk);
> > + clk_disable_unprepare(pp->clk_axi);
> > err_put_phy_node:
> > of_node_put(phy_node);
> > err_free_irq:
> > @@ -3744,6 +3751,7 @@ static int mvneta_remove(struct platform_device *pdev)
> >
> > unregister_netdev(dev);
> > clk_disable_unprepare(pp->clk);
> > + clk_disable_unprepare(pp->clk_axi);
> > free_percpu(pp->ports);
> > free_percpu(pp->stats);
> > irq_dispose_mapping(dev->irq);
> > --
> > 2.7.0.rc3
> >
>
>
next prev parent reply other threads:[~2016-01-20 9:42 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-20 8:06 [PATCH 0/4] net: mvneta: support more than one clk Jisheng Zhang
2016-01-20 8:06 ` [PATCH 1/4] net: mvneta: sort the headers in alphabetic order Jisheng Zhang
2016-01-20 8:46 ` Thomas Petazzoni
2016-01-20 8:06 ` [PATCH 2/4] net: mvneta: Try to get named core clock first Jisheng Zhang
2016-01-20 8:47 ` Thomas Petazzoni
2016-01-20 8:06 ` [PATCH 3/4] net: mvneta: mmc: get optional axi clk Jisheng Zhang
2016-01-20 8:51 ` Thomas Petazzoni
2016-01-20 8:53 ` Jisheng Zhang
2016-01-20 9:31 ` Sebastian Hesselbarth
2016-01-20 9:42 ` Jisheng Zhang [this message]
2016-01-20 11:03 ` Sebastian Hesselbarth
2016-01-20 11:11 ` Jisheng Zhang
2016-01-20 8:06 ` [PATCH 4/4] net: mvneta: update clocks property and document additional clock-names Jisheng Zhang
2016-01-20 9:07 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160120174223.53ccc36b@xhacker \
--to=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).