From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM: dts: at91: sama5d2 Xplained: add phy address and IRQ for macb0
Date: Fri, 22 Jan 2016 14:29:32 +0100 [thread overview]
Message-ID: <20160122132932.GG3608@piout.net> (raw)
In-Reply-To: <1453468842-16137-1-git-send-email-nicolas.ferre@atmel.com>
On 22/01/2016 at 14:20:25 +0100, Nicolas Ferre wrote :
> After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> the macb0 interface has difficulties to come back from power saving mode if
> address not explicitly set up.
> As the micrel phy on the board is actually configured to show up at address 1
> we use this explicitly.
> Adding the phy node and its real address fixes the issue.
>
> The phy IRQ and associated pinmux node is also added.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> Cc: stable at vger.kernel.org # 4.4+ // manual merge needed
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> v2: - correct typos in commit message
> - add a sentence about the IRQ + pinmux as well
> - add stable tag
>
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> index 77ddff036409..e683856c507c 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> @@ -114,9 +114,15 @@
>
> macb0: ethernet at f8008000 {
> pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_macb0_default>;
> + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
> phy-mode = "rmii";
> status = "okay";
> +
> + ethernet-phy at 1 {
> + reg = <0x1>;
> + interrupt-parent = <&pioA>;
> + interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
> + };
> };
>
> pdmic at f8018000 {
> @@ -300,6 +306,10 @@
> bias-disable;
> };
>
> + pinctrl_macb0_phy_irq: macb0_phy_irq {
> + pinmux = <PIN_PC9__GPIO>;
> + };
> +
> pinctrl_pdmic_default: pdmic_default {
> pinmux = <PIN_PB26__PDMIC_DAT>,
> <PIN_PB27__PDMIC_CLK>;
> --
> 2.1.3
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
prev parent reply other threads:[~2016-01-22 13:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-22 13:20 [PATCH v2] ARM: dts: at91: sama5d2 Xplained: add phy address and IRQ for macb0 Nicolas Ferre
2016-01-22 13:29 ` Alexandre Belloni [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160122132932.GG3608@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).