[PATCH v3] ARM64: kernel: implement ACPI parking protocol

[lorenzo.pieralisi@arm.com (Lorenzo Pieralisi)]

On Tue, Jan 26, 2016 at 03:13:30PM -0800, Loc Ho wrote:
> Hi Lorenzo,
> 
> On Tue, Jan 26, 2016 at 3:10 AM, Lorenzo Pieralisi
> <lorenzo.pieralisi@arm.com> wrote:
> > The SBBR and ACPI specifications allow ACPI based systems that do not
> > implement PSCI (eg systems with no EL3) to boot through the ACPI parking
> > protocol specification[1].
> >
> > This patch implements the ACPI parking protocol CPU operations, and adds
> > code that eases parsing the parking protocol data structures to the
> > ARM64 SMP initializion carried out at the same time as cpus enumeration.
> >
> > To wake-up the CPUs from the parked state, this patch implements a
> > wakeup IPI for ARM64 (ie arch_send_wakeup_ipi_mask()) that mirrors the
> > ARM one, so that a specific IPI is sent for wake-up purpose in order
> > to distinguish it from other IPI sources.
> >
> > Given the current ACPI MADT parsing API, the patch implements a glue
> > layer that helps passing MADT GICC data structure from SMP initialization
> > code to the parking protocol implementation somewhat overriding the CPU
> > operations interfaces. This to avoid creating a completely trasparent
> > DT/ACPI CPU operations layer that would require creating opaque
> > structure handling for CPUs data (DT represents CPU through DT nodes, ACPI
> > through static MADT table entries), which seems overkill given that ACPI
> > on ARM64 mandates only two booting protocols (PSCI and parking protocol),
> > so there is no need for further protocol additions.
> >
> > Based on the original work by Mark Salter <msalter@redhat.com>
> >
> > [1] https://acpica.org/sites/acpica/files/MP%20Startup%20for%20ARM%20platforms.docx
> >
> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > Cc: Will Deacon <will.deacon@arm.com>
> > Cc: Hanjun Guo <hanjun.guo@linaro.org>
> > Cc: Loc Ho <lho@apm.com>
> > Cc: Sudeep Holla <sudeep.holla@arm.com>
> > Cc: Catalin Marinas <catalin.marinas@arm.com>
> > Cc: Mark Rutland <mark.rutland@arm.com>
> > Cc: Mark Salter <msalter@redhat.com>
> > Cc: Al Stone <ahs3@redhat.com>
> 
> I had tested this with X-Gene Mustang board. It applies cleanly
> against 4.5.0-rc1 and detected all CPU's. For those of you want to try
> this, you need an FW update if you are using APM Tianocore. Otherwise,
> it will stuck in very early booting stage.

We can take this as a Tested-by, right ?

Thanks,
Lorenzo