From mboxrd@z Thu Jan 1 00:00:00 1970 From: thierry.reding@gmail.com (Thierry Reding) Date: Wed, 27 Jan 2016 15:15:22 +0100 Subject: [PATCH v2 2/2] ARM: tegra: Add high speed UARTs to Jetson TK1 device tree In-Reply-To: <1453827558-10954-3-git-send-email-ralf@ramses-pyramidenbau.de> References: <1453827558-10954-1-git-send-email-ralf@ramses-pyramidenbau.de> <1453827558-10954-3-git-send-email-ralf@ramses-pyramidenbau.de> Message-ID: <20160127141522.GB21779@ulmo> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Jan 26, 2016 at 05:59:18PM +0100, Ralf Ramsauer wrote: > This patch enables the APB DMA high speed UARTs of the Jetson TK1. So > far, they were only enabled in NVidia's official BSP. > > Those additional UARTs are exposed on the expansion connector J3A2: > > UART1: > Pin 41: BR_UART1_TXD > Pin 44: BR_UART1_RXD > > UART2: > Pin 65: UART2_RXD > Pin 68: UART2_TXD > Pin 71: UART2_CTS_L > Pin 74: UART2_RTS_L > > Signed-off-by: Ralf Ramsauer > --- > arch/arm/boot/dts/tegra124-jetson-tk1.dts | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) Applied, thanks. Thierry -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: