From mboxrd@z Thu Jan  1 00:00:00 1970
From: shawnguo@kernel.org (Shawn Guo)
Date: Tue, 2 Feb 2016 14:31:06 +0800
Subject: [PATCH 2/6] ARM: dts: imx6: use correct mclk frequency for audio
 codec
In-Reply-To: <1453294626-17608-3-git-send-email-LW@KARO-electronics.de>
References: <1453294626-17608-1-git-send-email-LW@KARO-electronics.de>
 <1453294626-17608-3-git-send-email-LW@KARO-electronics.de>
Message-ID: <20160202063106.GE8307@tiger>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed, Jan 20, 2016 at 01:57:02PM +0100, Lothar Wa?mann wrote:
> The reference clock for the SGTL5000 is generated by a 26MHz crystal
> oscillator on the Ka-Ro electronics STK5 eval kits. Use the correct
> frequency setting in DTB.
> 
> Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>

Applied, thanks.

> ---
>  arch/arm/boot/dts/imx6qdl-tx6.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> index 13cb7cc..9404668 100644
> --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> @@ -41,7 +41,7 @@
>  			compatible = "fixed-clock";
>  			reg = <0>;
>  			#clock-cells = <0>;
> -			clock-frequency = <27000000>;
> +			clock-frequency = <26000000>;
>  		};
>  	};
>  
> -- 
> 2.1.4
> 
>