linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] dt-bindings: add sun4i SPDIF transceiver bindings
Date: Tue, 2 Feb 2016 23:31:15 +0100	[thread overview]
Message-ID: <20160202223115.GE4652@lukather> (raw)
In-Reply-To: <1454424594-25208-2-git-send-email-codekipper@gmail.com>

Hi,

On Tue, Feb 02, 2016 at 03:49:53PM +0100, codekipper at gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
> 
> Add devicetree bindings for the SPDIF transceiver found on
> found on Allwinners A10 and A20 SoCs.
> 
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> ---
>  .../devicetree/bindings/sound/sun4i,spdif.txt      | 46 ++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/sun4i,spdif.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/sun4i,spdif.txt b/Documentation/devicetree/bindings/sound/sun4i,spdif.txt
> new file mode 100644
> index 0000000..55ed2f6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/sun4i,spdif.txt
> @@ -0,0 +1,46 @@
> +Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller
> +
> +The Allwinner S/PDIF audio block is a transceiver that allows the
> +processor to receive and transmit digital audio via an coaxial cable or
> +a fibre cable.
> +
> +Required properties:
> +
> +  - compatible		: should be one of the following:
> +    - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
> +
> +  - reg			: Offset and length of the register set for the device.
> +
> +  - interrupts		: Contains the spdif interrupt.
> +
> +  - dmas		: Generic dma devicetree binding as described in
> +			  Documentation/devicetree/bindings/dma/dma.txt.
> +
> +  - dma-names		: Two dmas have to be defined, "tx" and "rx".
> +
> +  - clocks		: Contains an entry for each entry in clock-names.
> +
> +  - clock-names		: Includes the following entries:
> +	"apb"		  clock for the spdif bus.
> +	"spdif"		  clock for spdif controller.
> +
> +Optional:
> +
> +  - spdif-in		: Enable block for capturing an SPDIF signal.
> +
> +  - spdif-out		: Enable block for transmitting an SPDIF signal.

Is that a generic property? What values can it hold?

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160202/b55261c4/attachment.sig>

  reply	other threads:[~2016-02-02 22:31 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-02 14:49 [PATCH v3 0/2] Add SPDIF support for Allwinner SoCs codekipper at gmail.com
2016-02-02 14:49 ` [PATCH v3 1/2] dt-bindings: add sun4i SPDIF transceiver bindings codekipper at gmail.com
2016-02-02 22:31   ` Maxime Ripard [this message]
2016-02-03  7:26     ` Code Kipper
2016-02-02 14:49 ` [PATCH v3 2/2] ASOC: sunxi: Add support for the SPDIF block codekipper at gmail.com
2016-02-02 16:01   ` kbuild test robot
2016-02-02 16:01   ` [PATCH] ASOC: sunxi: fix platform_no_drv_owner.cocci warnings kbuild test robot
2016-02-02 21:17   ` [PATCH v3 2/2] ASOC: sunxi: Add support for the SPDIF block Maxime Ripard
2016-02-03  8:41     ` Code Kipper
2016-02-02 19:17 ` [PATCH v3 0/2] Add SPDIF support for Allwinner SoCs Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160202223115.GE4652@lukather \
    --to=maxime.ripard@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).