From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Fri, 5 Feb 2016 12:15:49 +0100 Subject: [PATCH v3 5/5] pinctrl: sunxi: Use pin number when calling sunxi_pmx_set In-Reply-To: <1454542430-16572-6-git-send-email-k@japko.eu> References: <1454542430-16572-1-git-send-email-k@japko.eu> <1454542430-16572-6-git-send-email-k@japko.eu> Message-ID: <20160205111549.GC31506@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Feb 04, 2016 at 12:33:50AM +0100, Krzysztof Adamski wrote: > sunxi_pmx_set accepts pin number and then calculates offset by > subtracting pin_base from it. sunxi_pinctrl_gpio_get, on the other hand, > gets offset so we have to convert it to pin number so we won't get > negative value in sunxi_pmx_set. > > This was only used on A10 so far, where there is only one GPIO chip with > pin_base set to 0 so it didn't matter. However H3 also requires this > workaround but have two pinmux sections, triggering problem for PL port. > > Signed-off-by: Krzysztof Adamski Acked-by: Maxime Ripard Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: