From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v11 19/21] KVM: ARM64: Add a new feature bit for PMUv3
Date: Mon, 8 Feb 2016 13:29:57 +0100 [thread overview]
Message-ID: <20160208122957.GE620@cbox> (raw)
In-Reply-To: <1454656456-11640-20-git-send-email-zhaoshenglong@huawei.com>
On Fri, Feb 05, 2016 at 03:14:14PM +0800, Shannon Zhao wrote:
> From: Shannon Zhao <shannon.zhao@linaro.org>
>
> To support guest PMUv3, use one bit of the VCPU INIT feature array.
> Initialize the PMU when initialzing the vcpu with that bit and PMU
> overflow interrupt set.
>
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> Acked-by: Peter Maydell <peter.maydell@linaro.org>
> Reviewed-by: Andrew Jones <drjones@redhat.com>
> ---
> CC: Peter Maydell <peter.maydell@linaro.org>
> ---
> Documentation/virtual/kvm/api.txt | 2 ++
> arch/arm64/include/asm/kvm_host.h | 2 +-
> arch/arm64/include/uapi/asm/kvm.h | 1 +
> arch/arm64/kvm/reset.c | 3 +++
> include/kvm/arm_pmu.h | 2 ++
> include/uapi/linux/kvm.h | 1 +
> virt/kvm/arm/pmu.c | 9 +++++++++
> 7 files changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> index 07e4cdf..9684f8d 100644
> --- a/Documentation/virtual/kvm/api.txt
> +++ b/Documentation/virtual/kvm/api.txt
> @@ -2577,6 +2577,8 @@ Possible features:
> Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only).
> - KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 for the CPU.
> Depends on KVM_CAP_ARM_PSCI_0_2.
> + - KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU.
> + Depends on KVM_CAP_ARM_PMU_V3.
>
>
> 4.83 KVM_ARM_PREFERRED_TARGET
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index 6bab7fb..cb220b7 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -40,7 +40,7 @@
>
> #define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
>
> -#define KVM_VCPU_MAX_FEATURES 3
> +#define KVM_VCPU_MAX_FEATURES 4
>
> int __attribute_const__ kvm_target_cpu(void);
> int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
> diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
> index 2d4ca4b..6aedbe3 100644
> --- a/arch/arm64/include/uapi/asm/kvm.h
> +++ b/arch/arm64/include/uapi/asm/kvm.h
> @@ -94,6 +94,7 @@ struct kvm_regs {
> #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */
> #define KVM_ARM_VCPU_EL1_32BIT 1 /* CPU running a 32bit VM */
> #define KVM_ARM_VCPU_PSCI_0_2 2 /* CPU uses PSCI v0.2 */
> +#define KVM_ARM_VCPU_PMU_V3 3 /* Support guest PMUv3 */
>
> struct kvm_vcpu_init {
> __u32 target;
> diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
> index dfbce78..cf4f28a 100644
> --- a/arch/arm64/kvm/reset.c
> +++ b/arch/arm64/kvm/reset.c
> @@ -77,6 +77,9 @@ int kvm_arch_dev_ioctl_check_extension(long ext)
> case KVM_CAP_GUEST_DEBUG_HW_WPS:
> r = get_num_wrps();
> break;
> + case KVM_CAP_ARM_PMU_V3:
> + r = kvm_arm_support_pmu_v3();
> + break;
> case KVM_CAP_SET_GUEST_DEBUG:
> r = 1;
> break;
> diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
> index d73cb97..5f86e1d 100644
> --- a/include/kvm/arm_pmu.h
> +++ b/include/kvm/arm_pmu.h
> @@ -51,6 +51,7 @@ void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, u64 val);
> void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val);
> void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data,
> u64 select_idx);
> +bool kvm_arm_support_pmu_v3(void);
> #else
> struct kvm_pmu {
> };
> @@ -77,6 +78,7 @@ static inline void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, u64 val) {}
> static inline void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val) {}
> static inline void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu,
> u64 data, u64 select_idx) {}
> +static inline bool kvm_arm_support_pmu_v3(void) { return false; }
> #endif
>
> #endif
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index 9da9051..dc16d30 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -850,6 +850,7 @@ struct kvm_ppc_smmu_info {
> #define KVM_CAP_IOEVENTFD_ANY_LENGTH 122
> #define KVM_CAP_HYPERV_SYNIC 123
> #define KVM_CAP_S390_RI 124
> +#define KVM_CAP_ARM_PMU_V3 125
>
> #ifdef KVM_CAP_IRQ_ROUTING
>
> diff --git a/virt/kvm/arm/pmu.c b/virt/kvm/arm/pmu.c
> index 6b525df..2467d62 100644
> --- a/virt/kvm/arm/pmu.c
> +++ b/virt/kvm/arm/pmu.c
> @@ -384,3 +384,12 @@ void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data,
>
> pmc->perf_event = event;
> }
> +
> +bool kvm_arm_support_pmu_v3(void)
> +{
> + /* Check if HW_PERF_EVENTS are supported by checking the number of
> + * hardware performance counters. This could ensure physical PMU and
> + * PERF_EVENT driver existing.
> + */
nit: coding style, opening comment block should be on its own line
I don't understand the last sentence. Do you mean: "This ensures the
presence of a physical PMU and that CONFIG_PERF_EVENT is selected." ?
Thanks,
-Christoffer
next prev parent reply other threads:[~2016-02-08 12:29 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-05 7:13 [PATCH v11 00/21] KVM: ARM64: Add guest PMU support Shannon Zhao
2016-02-05 7:13 ` [PATCH v11 01/21] ARM64: Move PMU register related defines to asm/pmu.h Shannon Zhao
2016-02-05 7:13 ` [PATCH v11 02/21] KVM: ARM64: Define PMU data structure for each vcpu Shannon Zhao
2016-02-05 7:13 ` [PATCH v11 03/21] KVM: ARM64: Add offset defines for PMU registers Shannon Zhao
2016-02-05 7:13 ` [PATCH v11 04/21] KVM: ARM64: Add access handler for PMCR register Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 05/21] KVM: ARM64: Add access handler for PMSELR register Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 06/21] KVM: ARM64: Add access handler for PMCEID0 and PMCEID1 register Shannon Zhao
2016-02-08 12:09 ` Christoffer Dall
2016-02-20 13:15 ` Shannon Zhao
2016-02-20 13:30 ` Peter Maydell
2016-02-20 13:34 ` Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 07/21] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 08/21] KVM: ARM64: Add access handler for event type register Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 09/21] KVM: ARM64: Add access handler for event counter register Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 10/21] KVM: ARM64: Add access handler for PMCNTENSET and PMCNTENCLR register Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 11/21] KVM: ARM64: Add access handler for PMINTENSET and PMINTENCLR register Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 12/21] KVM: ARM64: Add access handler for PMOVSSET and PMOVSCLR register Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 13/21] KVM: ARM64: Add access handler for PMSWINC register Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 14/21] KVM: ARM64: Add helper to handle PMCR register bits Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 15/21] KVM: ARM64: Add access handler for PMUSERENR register Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 16/21] KVM: ARM64: Add PMU overflow interrupt routing Shannon Zhao
2016-02-08 12:26 ` Christoffer Dall
2016-02-20 13:32 ` Shannon Zhao
2016-02-22 7:35 ` Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 17/21] KVM: ARM64: Reset PMU state when resetting vcpu Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 18/21] KVM: ARM64: Free perf event of PMU when destroying vcpu Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 19/21] KVM: ARM64: Add a new feature bit for PMUv3 Shannon Zhao
2016-02-08 12:29 ` Christoffer Dall [this message]
2016-02-22 7:43 ` Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 20/21] KVM: ARM: Introduce per-vcpu kvm device controls Shannon Zhao
2016-02-08 12:40 ` Christoffer Dall
2016-02-20 13:38 ` Shannon Zhao
2016-02-05 7:14 ` [PATCH v11 21/21] KVM: ARM64: Add a new vcpu device control group for PMUv3 Shannon Zhao
2016-02-08 12:52 ` Christoffer Dall
2016-02-22 7:45 ` Shannon Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160208122957.GE620@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).