[PATCH v10 4/8] mfd: fsl imx25 Touchscreen ADC driver

[lee.jones@linaro.org (Lee Jones)]

On Tue, 02 Feb 2016, Markus Pargmann wrote:

> Hi,
> 
> On Monday, January 11, 2016 06:54:41 AM Lee Jones wrote:
> > On Mon, 14 Dec 2015, Markus Pargmann wrote:
> > 
> > > This is the core driver for imx25 touchscreen/adc driver. The module
> > > has one shared ADC and two different conversion queues which use the
> > > ADC. The two queues are identical. Both can be used for general purpose
> > > ADC but one is meant to be used for touchscreens.
> > > 
> > > This driver is the core which manages the central components and
> > > registers of the TSC/ADC unit. It manages the IRQs and forwards them to
> > > the correct components.
> > > 
> > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> > > Signed-off-by: Denis Carikli <denis@eukrea.com>
> > > 
> > > [ensure correct ADC clock depending on the IPG clock]
> > > Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
> > > Acked-by: Jonathan Cameron <jic23@kernel.org>
> > > ---
> > > 
> > > Notes:
> > >     Changes in v7:
> > >      - Cleanup bit defines in header files to be more readable
> > >      - Fix irq check to return with an error for irq <= 0
> > >      - Add COMPILE_TEST in Kconfig file
> > >     
> > >     Changes in v5:
> > >      - Remove ifdef CONFIG_OF as this driver is only for DT usage
> > >      - Remove module owner
> > >      - Add Kconfig dependencies ARCH_MX25 and OF
> > > 
> > >  drivers/mfd/Kconfig             |   9 ++
> > >  drivers/mfd/Makefile            |   2 +
> > >  drivers/mfd/fsl-imx25-tsadc.c   | 203 ++++++++++++++++++++++++++++++++++++++++
> > >  include/linux/mfd/imx25-tsadc.h | 140 +++++++++++++++++++++++++++
> > >  4 files changed, 354 insertions(+)
> > >  create mode 100644 drivers/mfd/fsl-imx25-tsadc.c
> > >  create mode 100644 include/linux/mfd/imx25-tsadc.h
> > 
> > For my own reference:
> >   Acked-by: Lee Jones <lee.jones@linaro.org>
> > 
> > I will apply this and sent out pull-requests to the relevant
> > maintainers once -rc1 is out.
> 
> Thanks. Do you mean just this patch or the whole series?

I will take all of the /driver patches.  The ARM patches need to go in
through ARM-SoC via the relevant sub-arch maintainer(s).

> Shall I resend the whole series to fix the commit title of the first
> patch?

No, that's fine.  I'll handle that *this time*.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog