From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Tue, 9 Feb 2016 10:35:13 +0000 Subject: [PATCH v10 4/8] mfd: fsl imx25 Touchscreen ADC driver In-Reply-To: <6151166.y0HMDdqtvF@adelgunde> References: <1450101234-2191-1-git-send-email-mpa@pengutronix.de> <1450101234-2191-5-git-send-email-mpa@pengutronix.de> <20160111065441.GW3331@x1> <6151166.y0HMDdqtvF@adelgunde> Message-ID: <20160209103513.GC24522@x1> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, 02 Feb 2016, Markus Pargmann wrote: > Hi, > > On Monday, January 11, 2016 06:54:41 AM Lee Jones wrote: > > On Mon, 14 Dec 2015, Markus Pargmann wrote: > > > > > This is the core driver for imx25 touchscreen/adc driver. The module > > > has one shared ADC and two different conversion queues which use the > > > ADC. The two queues are identical. Both can be used for general purpose > > > ADC but one is meant to be used for touchscreens. > > > > > > This driver is the core which manages the central components and > > > registers of the TSC/ADC unit. It manages the IRQs and forwards them to > > > the correct components. > > > > > > Signed-off-by: Markus Pargmann > > > Signed-off-by: Denis Carikli > > > > > > [ensure correct ADC clock depending on the IPG clock] > > > Signed-off-by: Juergen Borleis > > > Acked-by: Jonathan Cameron > > > --- > > > > > > Notes: > > > Changes in v7: > > > - Cleanup bit defines in header files to be more readable > > > - Fix irq check to return with an error for irq <= 0 > > > - Add COMPILE_TEST in Kconfig file > > > > > > Changes in v5: > > > - Remove ifdef CONFIG_OF as this driver is only for DT usage > > > - Remove module owner > > > - Add Kconfig dependencies ARCH_MX25 and OF > > > > > > drivers/mfd/Kconfig | 9 ++ > > > drivers/mfd/Makefile | 2 + > > > drivers/mfd/fsl-imx25-tsadc.c | 203 ++++++++++++++++++++++++++++++++++++++++ > > > include/linux/mfd/imx25-tsadc.h | 140 +++++++++++++++++++++++++++ > > > 4 files changed, 354 insertions(+) > > > create mode 100644 drivers/mfd/fsl-imx25-tsadc.c > > > create mode 100644 include/linux/mfd/imx25-tsadc.h > > > > For my own reference: > > Acked-by: Lee Jones > > > > I will apply this and sent out pull-requests to the relevant > > maintainers once -rc1 is out. > > Thanks. Do you mean just this patch or the whole series? I will take all of the /driver patches. The ARM patches need to go in through ARM-SoC via the relevant sub-arch maintainer(s). > Shall I resend the whole series to fix the commit title of the first > patch? No, that's fine. I'll handle that *this time*. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog