From mboxrd@z Thu Jan 1 00:00:00 1970 From: paul.burton@imgtec.com (Paul Burton) Date: Tue, 9 Feb 2016 08:11:34 -0800 Subject: [PATCH V3 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver to work on both Zynq and Microblaze In-Reply-To: <1455014518-8708-4-git-send-email-bharatku@xilinx.com> References: <1455014518-8708-1-git-send-email-bharatku@xilinx.com> <1455014518-8708-4-git-send-email-bharatku@xilinx.com> Message-ID: <20160209161134.GA24244@NP-P-BURTON> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Feb 09, 2016 at 04:11:56PM +0530, Bharat Kumar Gogada wrote: > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both > Zynq and Microblaze Architectures. > With these modifications drivers/pci/host/pcie-xilinx.c, will > work on both Zynq and Microblaze Architectures. > > Signed-off-by: Bharat Kumar Gogada > Signed-off-by: Ravi Kiran Gummaluri > --- > Changes: > Removed unneccessary architecture dependent number of MSI's. > Added #ifdef to pci_fixup_irqs which is ARM specific API. Hi Bharat, Why do you say pci_fixup_irqs is ARM-specific? It's declared in include/linux/pci.h, defined in drivers/pci/setup-irq.c & used by multiple architectures (alpha, arm, m68k, mips, sh, sparc, tile, unicore32 from a quick grep). Will you not break INTX-style interrupts by removing this? Thanks, Paul > --- > drivers/pci/host/pcie-xilinx.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c > index 13fec35..6cbce34 100644 > --- a/drivers/pci/host/pcie-xilinx.c > +++ b/drivers/pci/host/pcie-xilinx.c > @@ -704,7 +704,9 @@ static int xilinx_pcie_probe(struct platform_device *pdev) > #endif > pci_scan_child_bus(bus); > pci_assign_unassigned_bus_resources(bus); > +#ifdef CONFIG_ARM > pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); > +#endif > pci_bus_add_devices(bus); > platform_set_drvdata(pdev, port); > > -- > 2.1.1 >