From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 18/28] ARM: KVM: Add HYP mode entry code
Date: Tue, 9 Feb 2016 18:00:42 +0100 [thread overview]
Message-ID: <20160209170042.GA5171@cbox> (raw)
In-Reply-To: <1454583645-10144-19-git-send-email-marc.zyngier@arm.com>
On Thu, Feb 04, 2016 at 11:00:35AM +0000, Marc Zyngier wrote:
> This part is almost entierely borrowed from the existing code, just
> slightly simplifying the HYP function call (as we now save SPSR_hyp
> in the world switch).
>
> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
> ---
> arch/arm/kvm/hyp/Makefile | 1 +
> arch/arm/kvm/hyp/hyp-entry.S | 157 +++++++++++++++++++++++++++++++++++++++++++
> arch/arm/kvm/hyp/hyp.h | 2 +
> 3 files changed, 160 insertions(+)
> create mode 100644 arch/arm/kvm/hyp/hyp-entry.S
>
> diff --git a/arch/arm/kvm/hyp/Makefile b/arch/arm/kvm/hyp/Makefile
> index cfab402..a7d3a7e 100644
> --- a/arch/arm/kvm/hyp/Makefile
> +++ b/arch/arm/kvm/hyp/Makefile
> @@ -9,4 +9,5 @@ obj-$(CONFIG_KVM_ARM_HOST) += vgic-v2-sr.o
> obj-$(CONFIG_KVM_ARM_HOST) += vfp.o
> obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o
> obj-$(CONFIG_KVM_ARM_HOST) += entry.o
> +obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o
> obj-$(CONFIG_KVM_ARM_HOST) += switch.o
> diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S
> new file mode 100644
> index 0000000..44bc11f
> --- /dev/null
> +++ b/arch/arm/kvm/hyp/hyp-entry.S
> @@ -0,0 +1,157 @@
> +/*
> + * Copyright (C) 2012 - Virtual Open Systems and Columbia University
> + * Author: Christoffer Dall <c.dall@virtualopensystems.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License, version 2, as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
> + */
> +
> +#include <linux/linkage.h>
> +#include <asm/kvm_arm.h>
> +#include <asm/kvm_asm.h>
> +
> + .arch_extension virt
> +
> + .text
> + .pushsection .hyp.text, "ax"
> +
> +.macro load_vcpu reg
> + mrc p15, 4, \reg, c13, c0, 2 @ HTPIDR
> +.endm
> +
> +/********************************************************************
> + * Hypervisor exception vector and handlers
> + *
> + *
> + * The KVM/ARM Hypervisor ABI is defined as follows:
> + *
> + * Entry to Hyp mode from the host kernel will happen _only_ when an HVC
> + * instruction is issued since all traps are disabled when running the host
> + * kernel as per the Hyp-mode initialization at boot time.
> + *
> + * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc
> + * below) when the HVC instruction is called from SVC mode (i.e. a guest or the
> + * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC
> + * instructions are called from within Hyp-mode.
> + *
> + * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode):
> + * Switching to Hyp mode is done through a simple HVC #0 instruction. The
> + * exception vector code will check that the HVC comes from VMID==0.
> + * - r0 contains a pointer to a HYP function
> + * - r1, r2, and r3 contain arguments to the above function.
> + * - The HYP function will be called with its arguments in r0, r1 and r2.
> + * On HYP function return, we return directly to SVC.
> + *
> + * Note that the above is used to execute code in Hyp-mode from a host-kernel
> + * point of view, and is a different concept from performing a world-switch and
> + * executing guest code SVC mode (with a VMID != 0).
> + */
> +
> + .align 5
> +__hyp_vector:
> + .global __hyp_vector
> +__kvm_hyp_vector:
> + .weak __kvm_hyp_vector
> +
> + @ Hyp-mode exception vector
> + W(b) hyp_reset
> + W(b) hyp_undef
> + W(b) hyp_svc
> + W(b) hyp_pabt
> + W(b) hyp_dabt
> + W(b) hyp_hvc
> + W(b) hyp_irq
> + W(b) hyp_fiq
> +
> +.macro invalid_vector label, cause
> + .align
> +\label: b .
> +.endm
> +
> + invalid_vector hyp_reset
> + invalid_vector hyp_undef
> + invalid_vector hyp_svc
> + invalid_vector hyp_pabt
> + invalid_vector hyp_dabt
> + invalid_vector hyp_fiq
> +
> +hyp_hvc:
> + /*
> + * Getting here is either because of a trap from a guest,
> + * or from executing HVC from the host kernel, which means
> + * "do something in Hyp mode".
> + */
> + push {r0, r1, r2}
> +
> + @ Check syndrome register
> + mrc p15, 4, r1, c5, c2, 0 @ HSR
> + lsr r0, r1, #HSR_EC_SHIFT
> + cmp r0, #HSR_EC_HVC
> + bne guest_trap @ Not HVC instr.
> +
> + /*
> + * Let's check if the HVC came from VMID 0 and allow simple
> + * switch to Hyp mode
> + */
> + mrrc p15, 6, r0, r2, c2
> + lsr r2, r2, #16
> + and r2, r2, #0xff
> + cmp r2, #0
> + bne guest_trap @ Guest called HVC
> +
> + /*
> + * Getting here means host called HVC, we shift parameters and branch
> + * to Hyp function.
> + */
> + pop {r0, r1, r2}
> +
> + /* Check for __hyp_get_vectors */
> + cmp r0, #-1
> + mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR
> + beq 1f
> +
> + push {lr}
> +
> + mov lr, r0
> + mov r0, r1
> + mov r1, r2
> + mov r2, r3
> +
> +THUMB( orr lr, #1)
> + blx lr @ Call the HYP function
> +
> + pop {lr}
> +1: eret
> +
> +guest_trap:
> + load_vcpu r0 @ Load VCPU pointer to r0
> +
> + @ Check if we need the fault information
nit: this is not about faults at this point, so this comment should
either go or be reworded to "let's check if we trapped on guest VFP
access"
and I think the lsr can be moved into the ifdef as well.
> + lsr r1, r1, #HSR_EC_SHIFT
> +#ifdef CONFIG_VFPv3
> + cmp r1, #HSR_EC_CP_0_13
> + beq __vfp_guest_restore
> +#endif
> +
> + mov r1, #ARM_EXCEPTION_HVC
> + b __guest_exit
> +
> +hyp_irq:
> + push {r0, r1, r2}
> + mov r1, #ARM_EXCEPTION_IRQ
> + load_vcpu r0 @ Load VCPU pointer to r0
> + b __guest_exit
> +
> + .ltorg
> +
> + .popsection
> diff --git a/arch/arm/kvm/hyp/hyp.h b/arch/arm/kvm/hyp/hyp.h
> index 7ddca54..8bbd2a7 100644
> --- a/arch/arm/kvm/hyp/hyp.h
> +++ b/arch/arm/kvm/hyp/hyp.h
> @@ -123,4 +123,6 @@ void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt);
>
> int asmlinkage __guest_enter(struct kvm_vcpu *vcpu,
> struct kvm_cpu_context *host);
> +int asmlinkage __hyp_do_panic(const char *, int, u32);
> +
> #endif /* __ARM_KVM_HYP_H__ */
> --
> 2.1.4
>
Otherwise looke good.
Thanks,
-Christoffer
next prev parent reply other threads:[~2016-02-09 17:00 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 11:00 [PATCH v2 00/28] ARM: KVM: Rewrite the world switch in C (mostly) Marc Zyngier
2016-02-04 11:00 ` [PATCH v2 01/28] ARM: KVM: Move the HYP code to its own section Marc Zyngier
2016-02-09 18:39 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 02/28] ARM: KVM: Remove __kvm_hyp_code_start/__kvm_hyp_code_end Marc Zyngier
2016-02-09 18:39 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 03/28] ARM: KVM: Move VFP registers to a CPU context structure Marc Zyngier
2016-02-09 18:42 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 04/28] ARM: KVM: Move CP15 array into the " Marc Zyngier
2016-02-09 18:42 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 05/28] ARM: KVM: Move GP registers " Marc Zyngier
2016-02-09 18:42 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 06/28] ARM: KVM: Add a HYP-specific header file Marc Zyngier
2016-02-09 18:42 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 07/28] ARM: KVM: Add system register accessor macros Marc Zyngier
2016-02-10 17:25 ` Christoffer Dall
2016-02-10 17:32 ` Marc Zyngier
2016-02-04 11:00 ` [PATCH v2 08/28] ARM: KVM: Add TLB invalidation code Marc Zyngier
2016-02-09 18:42 ` Christoffer Dall
2016-02-10 15:32 ` Marc Zyngier
2016-02-04 11:00 ` [PATCH v2 09/28] ARM: KVM: Add CP15 save/restore code Marc Zyngier
2016-02-09 18:42 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 10/28] ARM: KVM: Add timer save/restore Marc Zyngier
2016-02-09 18:42 ` Christoffer Dall
2016-02-10 15:36 ` Marc Zyngier
2016-02-04 11:00 ` [PATCH v2 11/28] ARM: KVM: Add vgic v2 save/restore Marc Zyngier
2016-02-09 18:42 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 12/28] ARM: KVM: Add VFP save/restore Marc Zyngier
2016-02-09 18:42 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 13/28] ARM: KVM: Add banked registers save/restore Marc Zyngier
2016-02-09 18:42 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 14/28] ARM: KVM: Add guest entry code Marc Zyngier
2016-02-09 18:44 ` Christoffer Dall
2016-02-10 15:48 ` Marc Zyngier
2016-02-04 11:00 ` [PATCH v2 15/28] ARM: KVM: Add VFP lazy save/restore handler Marc Zyngier
2016-02-09 18:44 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 16/28] ARM: KVM: Add the new world switch implementation Marc Zyngier
2016-02-09 18:44 ` Christoffer Dall
2016-02-10 16:00 ` Marc Zyngier
2016-02-04 11:00 ` [PATCH v2 17/28] ARM: KVM: Add populating of fault data structure Marc Zyngier
2016-02-09 18:44 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 18/28] ARM: KVM: Add HYP mode entry code Marc Zyngier
2016-02-09 17:00 ` Christoffer Dall [this message]
2016-02-10 16:02 ` Marc Zyngier
2016-02-10 17:23 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 19/28] ARM: KVM: Add panic handling code Marc Zyngier
2016-02-09 18:45 ` Christoffer Dall
2016-02-10 16:03 ` Marc Zyngier
2016-02-04 11:00 ` [PATCH v2 20/28] ARM: KVM: Change kvm_call_hyp return type to unsigned long Marc Zyngier
2016-02-09 18:28 ` Christoffer Dall
2016-02-10 16:07 ` Marc Zyngier
2016-02-04 11:00 ` [PATCH v2 21/28] ARM: KVM: Remove the old world switch Marc Zyngier
2016-02-09 18:45 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 22/28] ARM: KVM: Switch to C-based stage2 init Marc Zyngier
2016-02-09 18:45 ` Christoffer Dall
2016-02-10 7:42 ` Marc Zyngier
2016-02-10 8:04 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 23/28] ARM: KVM: Remove __weak attributes Marc Zyngier
2016-02-09 18:45 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 24/28] ARM: KVM: Turn CP15 defines to an enum Marc Zyngier
2016-02-09 18:45 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 25/28] ARM: KVM: Cleanup asm-offsets.c Marc Zyngier
2016-02-09 18:45 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 26/28] ARM: KVM: Remove unused hyp_pc field Marc Zyngier
2016-02-09 18:39 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 27/28] ARM: KVM: Remove handling of ARM_EXCEPTION_DATA/PREF_ABORT Marc Zyngier
2016-02-09 18:39 ` Christoffer Dall
2016-02-04 11:00 ` [PATCH v2 28/28] ARM: KVM: Remove __kvm_hyp_exit/__kvm_hyp_exit_end Marc Zyngier
2016-02-09 18:39 ` Christoffer Dall
2016-02-09 18:49 ` [PATCH v2 00/28] ARM: KVM: Rewrite the world switch in C (mostly) Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160209170042.GA5171@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).