[PATCH 0/3] randconfig warning fixes for thermal

[PATCH 0/3] randconfig warning fixes for thermal

[Arnd Bergmann]

These are three simple fixes for ARM randconfig builds:

 [PATCH 1/3] thermal: spear: use __maybe_unused for PM functions
 [PATCH 2/3] thermal: allow spear-thermal driver to be a module
 [PATCH 3/3] thermal: allow u8500-thermal driver to be a module

All three bugs are on configurationsn that are not important and
that rarely happen even with randconfig builds.

	Arnd

[PATCH 1/3] thermal: spear: use __maybe_unused for PM functions

[Arnd Bergmann]

The spear thermal driver hides its suspend/resume function conditionally
based on CONFIG_PM, but references them based on CONFIG_PM_SLEEP, so
we get a warning if the former is set but the latter is not:

thermal/spear_thermal.c:58:12: warning: 'spear_thermal_suspend' defined but not used [-Wunused-function]
thermal/spear_thermal.c:75:12: warning: 'spear_thermal_resume' defined but not used [-Wunused-function]

This removes the #ifdef and instead uses a __maybe_uninitialized
annotation to avoid the warning and improve compile-time coverage.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/thermal/spear_thermal.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c
index 534dd9136662..81b35aace9de 100644
--- a/drivers/thermal/spear_thermal.c
+++ b/drivers/thermal/spear_thermal.c
@@ -54,8 +54,7 @@ static struct thermal_zone_device_ops ops = {
 	.get_temp = thermal_get_temp,
 };
 
-#ifdef CONFIG_PM
-static int spear_thermal_suspend(struct device *dev)
+static int __maybe_unused spear_thermal_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
@@ -72,7 +71,7 @@ static int spear_thermal_suspend(struct device *dev)
 	return 0;
 }
 
-static int spear_thermal_resume(struct device *dev)
+static int __maybe_unused spear_thermal_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev);
@@ -94,7 +93,6 @@ static int spear_thermal_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(spear_thermal_pm_ops, spear_thermal_suspend,
 		spear_thermal_resume);
-- 
2.7.0

[PATCH 2/3] thermal: allow spear-thermal driver to be a module

[Arnd Bergmann]

When the thermal subsystem is a loadable module, the spear driver
fails to build:

drivers/thermal/built-in.o: In function `spear_thermal_exit':
spear_thermal.c:(.text+0xf8): undefined reference to `thermal_zone_device_unregister'
drivers/thermal/built-in.o: In function `spear_thermal_probe':
spear_thermal.c:(.text+0x230): undefined reference to `thermal_zone_device_register'

This changes the symbol to a tristate, so Kconfig can track the
dependency correctly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/thermal/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 8cc4ac64a91c..0852fd028dc9 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -195,7 +195,7 @@ config IMX_THERMAL
 	  passive trip is crossed.
 
 config SPEAR_THERMAL
-	bool "SPEAr thermal sensor driver"
+	tristate "SPEAr thermal sensor driver"
 	depends on PLAT_SPEAR || COMPILE_TEST
 	depends on OF
 	help
-- 
2.7.0

[PATCH 3/3] thermal: allow u8500-thermal driver to be a module

[Arnd Bergmann]

When the thermal subsystem is a loadable module, the u8500 driver
fails to build:

drivers/thermal/built-in.o: In function `db8500_thermal_probe':
db8500_thermal.c:(.text+0x96c): undefined reference to `thermal_zone_device_register'
drivers/thermal/built-in.o: In function `db8500_thermal_work':
db8500_thermal.c:(.text+0xab4): undefined reference to `thermal_zone_device_update'

This changes the symbol to a tristate, so Kconfig can track the
dependency correctly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/mfd/db8500-prcmu.c | 3 +++
 drivers/thermal/Kconfig    | 4 ++--
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 2f4a1279b094..c0a86aeb1733 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -2045,6 +2045,7 @@ int db8500_prcmu_config_hotmon(u8 low, u8 high)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(db8500_prcmu_config_hotmon);
 
 static int config_hot_period(u16 val)
 {
@@ -2071,11 +2072,13 @@ int db8500_prcmu_start_temp_sense(u16 cycles32k)
 
 	return config_hot_period(cycles32k);
 }
+EXPORT_SYMBOL_GPL(db8500_prcmu_start_temp_sense);
 
 int db8500_prcmu_stop_temp_sense(void)
 {
 	return config_hot_period(0xFFFF);
 }
+EXPORT_SYMBOL_GPL(db8500_prcmu_stop_temp_sense);
 
 static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
 {
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 0852fd028dc9..7c92c09be213 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -237,8 +237,8 @@ config DOVE_THERMAL
 	  framework.
 
 config DB8500_THERMAL
-	bool "DB8500 thermal management"
-	depends on ARCH_U8500
+	tristate "DB8500 thermal management"
+	depends on MFD_DB8500_PRCMU
 	default y
 	help
 	  Adds DB8500 thermal management implementation according to the thermal
-- 
2.7.0

[PATCH 3/3] thermal: allow u8500-thermal driver to be a module

[Lee Jones]

On Mon, 25 Jan 2016, Arnd Bergmann wrote:

> When the thermal subsystem is a loadable module, the u8500 driver
> fails to build:
> 
> drivers/thermal/built-in.o: In function `db8500_thermal_probe':
> db8500_thermal.c:(.text+0x96c): undefined reference to `thermal_zone_device_register'
> drivers/thermal/built-in.o: In function `db8500_thermal_work':
> db8500_thermal.c:(.text+0xab4): undefined reference to `thermal_zone_device_update'
> 
> This changes the symbol to a tristate, so Kconfig can track the
> dependency correctly.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  drivers/mfd/db8500-prcmu.c | 3 +++
>  drivers/thermal/Kconfig    | 4 ++--
>  2 files changed, 5 insertions(+), 2 deletions(-)

As this touches a core Thermal file, I think it's better off going in
via that tree.  If that's a problem, I can take it with the relevant
Acks.

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
> index 2f4a1279b094..c0a86aeb1733 100644
> --- a/drivers/mfd/db8500-prcmu.c
> +++ b/drivers/mfd/db8500-prcmu.c
> @@ -2045,6 +2045,7 @@ int db8500_prcmu_config_hotmon(u8 low, u8 high)
>  
>  	return 0;
>  }
> +EXPORT_SYMBOL_GPL(db8500_prcmu_config_hotmon);
>  
>  static int config_hot_period(u16 val)
>  {
> @@ -2071,11 +2072,13 @@ int db8500_prcmu_start_temp_sense(u16 cycles32k)
>  
>  	return config_hot_period(cycles32k);
>  }
> +EXPORT_SYMBOL_GPL(db8500_prcmu_start_temp_sense);
>  
>  int db8500_prcmu_stop_temp_sense(void)
>  {
>  	return config_hot_period(0xFFFF);
>  }
> +EXPORT_SYMBOL_GPL(db8500_prcmu_stop_temp_sense);
>  
>  static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
>  {
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 0852fd028dc9..7c92c09be213 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -237,8 +237,8 @@ config DOVE_THERMAL
>  	  framework.
>  
>  config DB8500_THERMAL
> -	bool "DB8500 thermal management"
> -	depends on ARCH_U8500
> +	tristate "DB8500 thermal management"
> +	depends on MFD_DB8500_PRCMU
>  	default y
>  	help
>  	  Adds DB8500 thermal management implementation according to the thermal

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 3/3] thermal: allow u8500-thermal driver to be a module

[Eduardo Valentin]

On Wed, Jan 27, 2016 at 07:33:00AM +0000, Lee Jones wrote:
> On Mon, 25 Jan 2016, Arnd Bergmann wrote:
> 
> > When the thermal subsystem is a loadable module, the u8500 driver
> > fails to build:
> > 
> > drivers/thermal/built-in.o: In function `db8500_thermal_probe':
> > db8500_thermal.c:(.text+0x96c): undefined reference to `thermal_zone_device_register'
> > drivers/thermal/built-in.o: In function `db8500_thermal_work':
> > db8500_thermal.c:(.text+0xab4): undefined reference to `thermal_zone_device_update'
> > 
> > This changes the symbol to a tristate, so Kconfig can track the
> > dependency correctly.
> > 
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > ---
> >  drivers/mfd/db8500-prcmu.c | 3 +++
> >  drivers/thermal/Kconfig    | 4 ++--
> >  2 files changed, 5 insertions(+), 2 deletions(-)
> 
> As this touches a core Thermal file, I think it's better off going in
> via that tree.  If that's a problem, I can take it with the relevant
> Acks.
> 
> Acked-by: Lee Jones <lee.jones@linaro.org>


Thanks, I am adding to linux-next to see how it goes.


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160209/3f8a8e06/attachment.sig>

[PATCH 3/3] thermal: allow u8500-thermal driver to be a module

[Linus Walleij]

On Mon, Jan 25, 2016 at 5:44 PM, Arnd Bergmann <arnd@arndb.de> wrote:

> When the thermal subsystem is a loadable module, the u8500 driver
> fails to build:
>
> drivers/thermal/built-in.o: In function `db8500_thermal_probe':
> db8500_thermal.c:(.text+0x96c): undefined reference to `thermal_zone_device_register'
> drivers/thermal/built-in.o: In function `db8500_thermal_work':
> db8500_thermal.c:(.text+0xab4): undefined reference to `thermal_zone_device_update'
>
> This changes the symbol to a tristate, so Kconfig can track the
> dependency correctly.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH 0/3] randconfig warning fixes for thermal

[Eduardo Valentin]

On Mon, Jan 25, 2016 at 05:44:09PM +0100, Arnd Bergmann wrote:
> These are three simple fixes for ARM randconfig builds:
> 
>  [PATCH 1/3] thermal: spear: use __maybe_unused for PM functions
>  [PATCH 2/3] thermal: allow spear-thermal driver to be a module
>  [PATCH 3/3] thermal: allow u8500-thermal driver to be a module
> 
> All three bugs are on configurationsn that are not important and
> that rarely happen even with randconfig builds.
> 
> 	Arnd

Thanks a lot for your cleanups Arnd,
queueing all three.

Eduardo Valentin

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160209/57f41a2f/attachment.sig>