From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] ARM: mvebu: add NAND description to Armada 370 DB and Armada XP DB
Date: Wed, 10 Feb 2016 18:18:51 +0100 [thread overview]
Message-ID: <20160210171851.GD9492@lunn.ch> (raw)
In-Reply-To: <1455121756-20804-2-git-send-email-thomas.petazzoni@free-electrons.com>
On Wed, Feb 10, 2016 at 05:29:16PM +0100, Thomas Petazzoni wrote:
> This commit adds the Device Tree description for the 1GB NAND flash
> present in the Armada 370 DB and Armada XP DB evaluation boards from
> Marvell.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Thanks
Andrew
> ---
> Changes since v1:
> - Use the new MTD partitions DT binding, with all partitions grouped
> into a 'partitions' subnode. Suggested by Andrew Lunn.
> ---
> arch/arm/boot/dts/armada-370-db.dts | 27 +++++++++++++++++++++++++++
> arch/arm/boot/dts/armada-xp-db.dts | 28 ++++++++++++++++++++++++++++
> 2 files changed, 55 insertions(+)
>
> diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
> index bb280de..2364fc5 100644
> --- a/arch/arm/boot/dts/armada-370-db.dts
> +++ b/arch/arm/boot/dts/armada-370-db.dts
> @@ -168,6 +168,33 @@
> spi-max-frequency = <50000000>;
> };
> };
> +
> + nand at d0000 {
> + status = "okay";
> + num-cs = <1>;
> + marvell,nand-keep-config;
> + marvell,nand-enable-arbiter;
> + nand-on-flash-bbt;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition at 0 {
> + label = "U-Boot";
> + reg = <0 0x800000>;
> + };
> + partition at 800000 {
> + label = "Linux";
> + reg = <0x800000 0x800000>;
> + };
> + partition at 1000000 {
> + label = "Filesystem";
> + reg = <0x1000000 0x3f000000>;
> + };
> + };
> + };
> };
>
> pcie-controller {
> diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
> index f774101..96aaaed 100644
> --- a/arch/arm/boot/dts/armada-xp-db.dts
> +++ b/arch/arm/boot/dts/armada-xp-db.dts
> @@ -229,6 +229,34 @@
> spi-max-frequency = <20000000>;
> };
> };
> +
> + nand at d0000 {
> + status = "okay";
> + num-cs = <1>;
> + marvell,nand-keep-config;
> + marvell,nand-enable-arbiter;
> + nand-on-flash-bbt;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition at 0 {
> + label = "U-Boot";
> + reg = <0 0x800000>;
> + };
> + partition at 800000 {
> + label = "Linux";
> + reg = <0x800000 0x800000>;
> + };
> + partition at 1000000 {
> + label = "Filesystem";
> + reg = <0x1000000 0x3f000000>;
> +
> + };
> + };
> + };
> };
> };
> };
> --
> 2.6.4
>
next prev parent reply other threads:[~2016-02-10 17:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-10 16:29 [PATCH v2 1/2] ARM: mvebu: use armada-370-sata for SATA on Armada 375 Thomas Petazzoni
2016-02-10 16:29 ` [PATCH v2 2/2] ARM: mvebu: add NAND description to Armada 370 DB and Armada XP DB Thomas Petazzoni
2016-02-10 17:18 ` Andrew Lunn [this message]
2016-02-12 16:50 ` Gregory CLEMENT
2016-02-10 17:17 ` [PATCH v2 1/2] ARM: mvebu: use armada-370-sata for SATA on Armada 375 Andrew Lunn
2016-02-12 16:49 ` Gregory CLEMENT
-- strict thread matches above, loose matches on Subject: below --
2016-01-27 15:24 [PATCH 0/2] ARM: mvebu: misc DT improvements Thomas Petazzoni
2016-01-27 15:24 ` [PATCH v2 2/2] ARM: mvebu: add NAND description to Armada 370 DB and Armada XP DB Thomas Petazzoni
2016-01-27 17:16 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160210171851.GD9492@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).