From: mturquette@baylibre.com (Michael Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/14] clk: Add {devm_}clk_hw_{register, unregister}() APIs
Date: Mon, 15 Feb 2016 14:13:32 -0800 [thread overview]
Message-ID: <20160215221332.2278.64497@quark.deferred.io> (raw)
In-Reply-To: <1454982341-22715-4-git-send-email-sboyd@codeaurora.org>
Quoting Stephen Boyd (2016-02-08 17:45:30)
> We've largely split the clk consumer and provider APIs along
> struct clk and struct clk_hw, but clk_register() still returns a
> struct clk pointer for each struct clk_hw that's registered.
> Eventually we'd like to only allocate struct clks when there's a
> user, because struct clk is per-user now, so clk_register() needs
> to change.
>
> Let's add new APIs to register struct clk_hws, but this time
> we'll hide the struct clk from the caller by returning an int
> error code. Also add an unregistration API that takes the clk_hw
> structure that was passed to the registration API. This way
> provider drivers never have to deal with a struct clk pointer
> unless they're using the clk consumer APIs.
>
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Looks good to me.
Regards,
Mike
> ---
> Documentation/driver-model/devres.txt | 1 +
> drivers/clk/clk.c | 86 +++++++++++++++++++++++++++++++++++
> include/linux/clk-provider.h | 6 +++
> 3 files changed, 93 insertions(+)
>
> diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
> index 831a5363f6be..600e30bf52c5 100644
> --- a/Documentation/driver-model/devres.txt
> +++ b/Documentation/driver-model/devres.txt
> @@ -236,6 +236,7 @@ certainly invest a bit more effort into libata core layer).
> CLOCK
> devm_clk_get()
> devm_clk_put()
> + devm_clk_hw_register()
>
> DMA
> dmam_alloc_coherent()
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index b4db67a446c8..adaaead3639f 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -2613,6 +2613,22 @@ fail_out:
> }
> EXPORT_SYMBOL_GPL(clk_register);
>
> +/**
> + * clk_hw_register - register a clk_hw and return an error code
> + * @dev: device that is registering this clock
> + * @hw: link to hardware-specific clock data
> + *
> + * clk_hw_register is the primary interface for populating the clock tree with
> + * new clock nodes. It returns an integer equal to zero indicating success or
> + * less than zero indicating failure. Drivers must test for an error code after
> + * calling clk_hw_register().
> + */
> +int clk_hw_register(struct device *dev, struct clk_hw *hw)
> +{
> + return PTR_ERR_OR_ZERO(clk_register(dev, hw));
> +}
> +EXPORT_SYMBOL_GPL(clk_hw_register);
> +
> /* Free memory allocated for a clock. */
> static void __clk_release(struct kref *ref)
> {
> @@ -2714,11 +2730,26 @@ void clk_unregister(struct clk *clk)
> }
> EXPORT_SYMBOL_GPL(clk_unregister);
>
> +/**
> + * clk_hw_unregister - unregister a currently registered clk_hw
> + * @hw: hardware-specific clock data to unregister
> + */
> +void clk_hw_unregister(struct clk_hw *hw)
> +{
> + clk_unregister(hw->clk);
> +}
> +EXPORT_SYMBOL_GPL(clk_hw_unregister);
> +
> static void devm_clk_release(struct device *dev, void *res)
> {
> clk_unregister(*(struct clk **)res);
> }
>
> +static void devm_clk_hw_release(struct device *dev, void *res)
> +{
> + clk_hw_unregister(*(struct clk_hw **)res);
> +}
> +
> /**
> * devm_clk_register - resource managed clk_register()
> * @dev: device that is registering this clock
> @@ -2749,6 +2780,36 @@ struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw)
> }
> EXPORT_SYMBOL_GPL(devm_clk_register);
>
> +/**
> + * devm_clk_hw_register - resource managed clk_hw_register()
> + * @dev: device that is registering this clock
> + * @hw: link to hardware-specific clock data
> + *
> + * Managed clk_hw_register(). Clocks returned from this function are
> + * automatically clk_hw_unregister()ed on driver detach. See clk_hw_register()
> + * for more information.
> + */
> +int devm_clk_hw_register(struct device *dev, struct clk_hw *hw)
> +{
> + struct clk_hw **hwp;
> + int ret;
> +
> + hwp = devres_alloc(devm_clk_hw_release, sizeof(*hwp), GFP_KERNEL);
> + if (!hwp)
> + return -ENOMEM;
> +
> + ret = clk_hw_register(dev, hw);
> + if (!ret) {
> + *hwp = hw;
> + devres_add(dev, hwp);
> + } else {
> + devres_free(hwp);
> + }
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(devm_clk_hw_register);
> +
> static int devm_clk_match(struct device *dev, void *res, void *data)
> {
> struct clk *c = res;
> @@ -2757,6 +2818,15 @@ static int devm_clk_match(struct device *dev, void *res, void *data)
> return c == data;
> }
>
> +static int devm_clk_hw_match(struct device *dev, void *res, void *data)
> +{
> + struct clk_hw *hw = res;
> +
> + if (WARN_ON(!hw))
> + return 0;
> + return hw == data;
> +}
> +
> /**
> * devm_clk_unregister - resource managed clk_unregister()
> * @clk: clock to unregister
> @@ -2771,6 +2841,22 @@ void devm_clk_unregister(struct device *dev, struct clk *clk)
> }
> EXPORT_SYMBOL_GPL(devm_clk_unregister);
>
> +/**
> + * devm_clk_hw_unregister - resource managed clk_hw_unregister()
> + * @dev: device that is unregistering the hardware-specific clock data
> + * @hw: link to hardware-specific clock data
> + *
> + * Unregister a clk_hw registered with devm_clk_hw_register(). Normally
> + * this function will not need to be called and the resource management
> + * code will ensure that the resource is freed.
> + */
> +void devm_clk_hw_unregister(struct device *dev, struct clk_hw *hw)
> +{
> + WARN_ON(devres_release(dev, devm_clk_hw_release, devm_clk_hw_match,
> + hw));
> +}
> +EXPORT_SYMBOL_GPL(devm_clk_hw_unregister);
> +
> /*
> * clkdev helpers
> */
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 1143e38555a4..abc16d77fb62 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -639,9 +639,15 @@ void of_gpio_mux_clk_setup(struct device_node *node);
> struct clk *clk_register(struct device *dev, struct clk_hw *hw);
> struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);
>
> +int __must_check clk_hw_register(struct device *dev, struct clk_hw *hw);
> +int __must_check devm_clk_hw_register(struct device *dev, struct clk_hw *hw);
> +
> void clk_unregister(struct clk *clk);
> void devm_clk_unregister(struct device *dev, struct clk *clk);
>
> +void clk_hw_unregister(struct clk_hw *hw);
> +void devm_clk_hw_unregister(struct device *dev, struct clk_hw *hw);
> +
> /* helper functions */
> const char *__clk_get_name(const struct clk *clk);
> const char *clk_hw_get_name(const struct clk_hw *hw);
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
next prev parent reply other threads:[~2016-02-15 22:13 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-09 1:45 [PATCH 00/14] clk_hw based clkdev/DT providers Stephen Boyd
2016-02-09 1:45 ` [PATCH 01/14] mfd: intel_quark_i2c_gpio: Use clkdev_create() Stephen Boyd
2016-02-10 16:23 ` Lee Jones
2016-02-10 18:35 ` Stephen Boyd
2016-02-11 9:09 ` Lee Jones
2016-02-11 11:08 ` Lee Jones
2016-02-15 15:14 ` Andy Shevchenko
2016-02-15 22:13 ` Michael Turquette
2016-02-09 1:45 ` [PATCH 02/14] clkdev: Remove clk_register_clkdevs() Stephen Boyd
2016-02-15 15:16 ` Andy Shevchenko
2016-02-15 22:12 ` Michael Turquette
2016-02-09 1:45 ` [PATCH 03/14] clk: Add {devm_}clk_hw_{register,unregister}() APIs Stephen Boyd
2016-02-15 22:13 ` Michael Turquette [this message]
2016-02-09 1:45 ` [PATCH 04/14] clk: Add clk_hw OF clk providers Stephen Boyd
2016-02-09 3:31 ` kbuild test robot
2016-02-09 1:45 ` [PATCH 05/14] clkdev: Add clk_hw based registration APIs Stephen Boyd
2016-02-09 1:45 ` [PATCH 06/14] clk: divider: Add hw " Stephen Boyd
2016-02-09 1:45 ` [PATCH 07/14] clk: gate: " Stephen Boyd
2016-02-09 1:45 ` [PATCH 08/14] clk: mux: " Stephen Boyd
2016-02-09 1:45 ` [PATCH 09/14] clk: fixed-factor: " Stephen Boyd
2016-02-09 1:45 ` [PATCH 10/14] clk: fractional-divider: " Stephen Boyd
2016-02-09 1:45 ` [PATCH 11/14] clk: composite: " Stephen Boyd
2016-02-09 1:45 ` [PATCH 12/14] clk: gpio: " Stephen Boyd
2016-02-09 1:45 ` [PATCH 13/14] clk: fixed-rate: " Stephen Boyd
2016-02-09 1:45 ` [PATCH 14/14] clk: qcom: Migrate to clk_hw based registration and OF APIs Stephen Boyd
2016-02-09 5:30 ` kbuild test robot
2016-02-09 8:01 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160215221332.2278.64497@quark.deferred.io \
--to=mturquette@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).