[PATCH 1/2] dt-bindings: clock: adpll: Add binding documentation for TI adpll

[tony@atomide.com (Tony Lindgren)]

* Michael Turquette <mturquette@baylibre.com> [160216 17:17]:
> Quoting Tony Lindgren (2016-02-12 13:20:08)
> > +Required properties:
> > +- compatible : shall be one of "ti,dm814-adpll-s-clock" or
> > +  "ti,dm814-adpll-lj-clock" depending on the type of the ADPLL
> > +- #clock-cells : from common clock binding; shall be set to 0.
> 
> Thanks for the patch.
> 
> clock-cells = 1 in both of the examples below (which looks right).

Oops thanks, will update to 1.

> > +- clocks : link phandles of parent clocks clkinp and clkinpulow, note
> > +  that the adpll-s-clock also has an optional clkinphif
> > +- reg : address and length of the register set for controlling the ADPLL.
> > +
> > +Examples:
> > +       adpll_mpu_ck: adpll at 40 {
> > +               #clock-cells = <1>;
> > +               compatible = "ti,dm814-adpll-s-clock";
> > +               reg = <0x40 0x40>;
> > +               clocks = <&devosc_ck &devosc_ck &devosc_ck>;
> > +               clock-names = "clkinp", "clkinpulow", "clkinphif";
> > +               clock-indices = <0>, <1>, <2>, <3>;
> 
> Why is clock-indices necessary?

Hmm yeah I don't think it's needed, so will drop.

Regards,

Tony