From: lorenzo.pieralisi@arm.com (Lorenzo Pieralisi)
To: linux-arm-kernel@lists.infradead.org
Subject: KASAN issues with idle / hotplug area
Date: Thu, 18 Feb 2016 09:39:38 +0000 [thread overview]
Message-ID: <20160218093938.GB12476@red-moon> (raw)
In-Reply-To: <56C57F40.3050500@virtuozzo.com>
On Thu, Feb 18, 2016 at 11:22:24AM +0300, Andrey Ryabinin wrote:
[...]
> > I also tried using __attribute__((no_sanitize_address)) directly, in
> > case there was some header issue, but that doesn't seem to be the case.
> >
> > I'm using the Linaro 15.08 AArch64 GCC 5.1. Is anyone else able to
> > confirm whether they see the same? Does the same happen for x86?
> >
>
> Confirming, this happens on every GCC I have (including x86).
> It seems that 'no_sanitize_address' in gcc removes only memory access checks
> but it doesn't remove stack redzones.
> I think this is wrong, e.g. clang removes instrumentation completely. I'll submit a bug.
>
> But we need fix this in kernel.
> I see two options here:
> * completely disable instrumentation for drivers/firmware/psci.c
We have to have a way to disable instrumentation for functions that
are used to call into FW and return via different code paths.
> * get back to assembly implementation
No, we are certainly not reverting the SMCCC work because Kasan adds
instrumentation to C functions, that's not even an option.
Is it possible at all to implement a function to remove instrumentation
for a chunk of memory (ie resetting the shadow memory to a clean slate
for a range of stack addresses) ?
Thanks,
Lorenzo
next prev parent reply other threads:[~2016-02-18 9:39 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-01 10:54 [PATCH v5sub1 0/8] arm64: split linear and kernel mappings Ard Biesheuvel
2016-02-01 10:54 ` [PATCH v5sub1 1/8] of/fdt: make memblock minimum physical address arch configurable Ard Biesheuvel
2016-02-01 10:54 ` [PATCH v5sub1 2/8] arm64: add support for ioremap() block mappings Ard Biesheuvel
2016-02-01 14:10 ` Mark Rutland
2016-02-01 14:56 ` Catalin Marinas
2016-02-01 10:54 ` [PATCH v5sub1 3/8] arm64: introduce KIMAGE_VADDR as the virtual base of the kernel region Ard Biesheuvel
2016-02-01 10:54 ` [PATCH v5sub1 4/8] arm64: pgtable: implement static [pte|pmd|pud]_offset variants Ard Biesheuvel
2016-02-01 10:54 ` [PATCH v5sub1 5/8] arm64: decouple early fixmap init from linear mapping Ard Biesheuvel
2016-02-01 10:54 ` [PATCH v5sub1 6/8] arm64: kvm: deal with kernel symbols outside of " Ard Biesheuvel
2016-02-01 10:54 ` [PATCH v5sub1 7/8] arm64: move kernel image to base of vmalloc area Ard Biesheuvel
2016-02-01 12:24 ` Catalin Marinas
2016-02-01 12:27 ` Ard Biesheuvel
2016-02-01 13:41 ` Catalin Marinas
2016-02-01 14:32 ` Mark Rutland
2016-02-12 14:58 ` Catalin Marinas
2016-02-12 15:02 ` Ard Biesheuvel
2016-02-12 15:10 ` Catalin Marinas
2016-02-12 15:17 ` Ard Biesheuvel
2016-02-12 15:26 ` Catalin Marinas
2016-02-12 15:38 ` Sudeep Holla
2016-02-12 16:06 ` Catalin Marinas
2016-02-12 16:44 ` Ard Biesheuvel
2016-02-15 14:28 ` Andrey Ryabinin
2016-02-15 14:35 ` Mark Rutland
2016-02-15 18:59 ` Catalin Marinas
2016-02-16 12:59 ` Andrey Ryabinin
2016-02-16 14:12 ` Mark Rutland
2016-02-16 14:29 ` Mark Rutland
2016-02-16 15:17 ` Ard Biesheuvel
2016-02-16 15:36 ` Andrey Ryabinin
2016-02-16 16:42 ` Mark Rutland
2016-02-17 9:15 ` Andrey Ryabinin
2016-02-17 10:10 ` James Morse
2016-02-17 10:19 ` Catalin Marinas
2016-02-17 10:36 ` Catalin Marinas
2016-02-17 10:18 ` Catalin Marinas
2016-02-17 10:48 ` Mark Rutland
2016-02-17 14:39 ` Mark Rutland
2016-02-17 16:31 ` Andrey Ryabinin
2016-02-17 19:35 ` Mark Rutland
2016-02-17 17:01 ` KASAN issues with idle / hotplug area (was: Re: [PATCH v5sub1 7/8] arm64: move kernel image to base of vmalloc area) Mark Rutland
2016-02-17 17:56 ` Mark Rutland
2016-02-17 19:16 ` Mark Rutland
2016-02-18 8:06 ` Ard Biesheuvel
2016-02-18 8:22 ` KASAN issues with idle / hotplug area Andrey Ryabinin
2016-02-18 8:42 ` Andrey Ryabinin
2016-02-18 9:38 ` Andrey Ryabinin
2016-02-18 11:34 ` Mark Rutland
2016-02-18 9:39 ` Lorenzo Pieralisi [this message]
2016-02-18 11:38 ` Mark Rutland
2016-02-18 11:45 ` Andrey Ryabinin
2016-02-18 11:15 ` Mark Rutland
2016-02-18 11:46 ` Andrey Ryabinin
2016-02-18 12:08 ` Mark Rutland
2016-02-12 17:47 ` [PATCH v5sub1 7/8] arm64: move kernel image to base of vmalloc area James Morse
2016-02-12 18:01 ` Ard Biesheuvel
2016-02-01 10:54 ` [PATCH v5sub1 8/8] arm64: allow kernel Image to be loaded anywhere in physical memory Ard Biesheuvel
2016-02-01 14:50 ` Mark Rutland
2016-02-01 16:28 ` Fu Wei
2016-02-16 8:55 ` Fu Wei
2016-02-01 15:06 ` Catalin Marinas
2016-02-01 15:13 ` Ard Biesheuvel
2016-02-01 16:31 ` Ard Biesheuvel
2016-02-01 17:31 ` Catalin Marinas
2016-02-01 17:57 ` Ard Biesheuvel
2016-02-01 18:02 ` Catalin Marinas
2016-02-01 18:30 ` [PATCH] arm64: move back to generic memblock_enforce_memory_limit() Ard Biesheuvel
2016-02-02 10:19 ` Catalin Marinas
2016-02-02 10:28 ` Ard Biesheuvel
2016-02-02 10:44 ` Catalin Marinas
2016-02-12 19:45 ` [PATCH v5sub1 0/8] arm64: split linear and kernel mappings Matthias Brugger
2016-02-12 19:47 ` Ard Biesheuvel
2016-02-12 20:10 ` Matthias Brugger
2016-02-12 20:37 ` Ard Biesheuvel
2016-02-13 14:28 ` Ard Biesheuvel
2016-02-15 13:29 ` Matthias Brugger
2016-02-15 13:40 ` Will Deacon
2016-02-15 14:58 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160218093938.GB12476@red-moon \
--to=lorenzo.pieralisi@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox