From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: OMAP1: DMA: Provide dma_slave_map to omap-dma
Date: Fri, 19 Feb 2016 10:07:12 -0800 [thread overview]
Message-ID: <20160219180711.GJ21202@atomide.com> (raw)
In-Reply-To: <1454423227-31830-2-git-send-email-peter.ujfalusi@ti.com>
* Peter Ujfalusi <peter.ujfalusi@ti.com> [160202 06:28]:
> OMAP1 can not boot in DT mode and to be able to clean up the driver
> regarding to the dmaengine API use (switching to the new API) the
> device/slave -> filter mapping needs to be provided to the omap-dma driver.
Aaro, care to ack this one?
Regards,
Tony
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
> arch/arm/mach-omap1/dma.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
> index 7b02ed218a42..f6ba589cd312 100644
> --- a/arch/arm/mach-omap1/dma.c
> +++ b/arch/arm/mach-omap1/dma.c
> @@ -25,6 +25,7 @@
> #include <linux/device.h>
> #include <linux/io.h>
> #include <linux/dma-mapping.h>
> +#include <linux/dmaengine.h>
> #include <linux/omap-dma.h>
> #include <mach/tc.h>
>
> @@ -265,6 +266,42 @@ static const struct platform_device_info omap_dma_dev_info = {
> .num_res = 1,
> };
>
> +/* OMAP730, OMAP850 */
> +static const struct dma_slave_map omap7xx_sdma_map[] = {
> + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
> + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
> + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) },
> + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) },
> + { "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
> + { "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
> + { "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
> + { "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
> + { "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
> + { "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
> + { "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
> + { "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
> +};
> +
> +/* OMAP1510, OMAP1610*/
> +static const struct dma_slave_map omap1xxx_sdma_map[] = {
> + { "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
> + { "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
> + { "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(10) },
> + { "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(11) },
> + { "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(16) },
> + { "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(17) },
> + { "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
> + { "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
> + { "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
> + { "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
> + { "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
> + { "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
> + { "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
> + { "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
> + { "mmci-omap.1", "tx", SDMA_FILTER_PARAM(54) },
> + { "mmci-omap.1", "rx", SDMA_FILTER_PARAM(55) },
> +};
> +
> static struct omap_system_dma_plat_info dma_plat_info __initdata = {
> .reg_map = reg_map,
> .channel_stride = 0x40,
> @@ -342,6 +379,14 @@ static int __init omap1_system_dma_init(void)
> p.dma_attr = d;
> p.errata = configure_dma_errata();
>
> + if (cpu_is_omap7xx()) {
> + p.slave_map = omap7xx_sdma_map;
> + p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map);
> + } else {
> + p.slave_map = omap1xxx_sdma_map;
> + p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
> + }
> +
> ret = platform_device_add_data(pdev, &p, sizeof(p));
> if (ret) {
> dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
> --
> 2.7.0
>
next prev parent reply other threads:[~2016-02-19 18:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-02 14:27 [PATCH 0/2] ARM: OMAP1/OMAP2+: Add dma_slave_map to board files Peter Ujfalusi
2016-02-02 14:27 ` [PATCH 1/2] ARM: OMAP1: DMA: Provide dma_slave_map to omap-dma Peter Ujfalusi
2016-02-19 18:07 ` Tony Lindgren [this message]
2016-02-19 21:44 ` Aaro Koskinen
2016-02-22 7:19 ` Peter Ujfalusi
2016-02-22 18:02 ` Tony Lindgren
2016-02-02 14:27 ` [PATCH 2/2] ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160219180711.GJ21202@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).