From mboxrd@z Thu Jan 1 00:00:00 1970 From: michael@amarulasolutions.com (Michael Trimarchi) Date: Sat, 20 Feb 2016 18:19:28 +0100 Subject: [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support In-Reply-To: References: <1455963652-24618-1-git-send-email-michael@amarulasolutions.com> <1455963652-24618-5-git-send-email-michael@amarulasolutions.com> Message-ID: <20160220171921.GB24064@panicking> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Fabio On Sat, Feb 20, 2016 at 12:11:14PM -0200, Fabio Estevam wrote: > On Sat, Feb 20, 2016 at 8:20 AM, Michael Trimarchi > wrote: > > > + reg_1p8v: regulator-1p8v { > > + compatible = "regulator-fixed"; > > + regulator-name = "1P8V"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-boot-on; > > + regulator-always-on; > > These last two properties can be removed. > This map the phy connection. Regulator are really always on and they are always on Michael > > + }; > > + > > + reg_3p3v: regulator-3p3v { > > + compatible = "regulator-fixed"; > > + regulator-name = "3P3V"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-boot-on; > > + regulator-always-on; > > Ditto. > > > + pinctrl_spi4: spi4grp { > > + fsl,pins = < > > + MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1 > > + MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1 > > + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1 > > + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000 > > + >; > > + }; > > pinctrl_spi4 seems to be unused. -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com |