From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] omap device tree changes for v4.6 merge window, part 1
Date: Mon, 22 Feb 2016 13:56:12 -0800 [thread overview]
Message-ID: <20160222215612.GV13417@atomide.com> (raw)
The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d:
Linux 4.5-rc1 (2016-01-24 13:06:47 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.6/dt-pt1
for you to fetch changes up to b9d3ec1d98c658226606e66e55c940491447e617:
ARM: dts: am57xx-beagle-x15: Add eeprom information (2016-02-22 11:18:40 -0800)
----------------------------------------------------------------
Device tree changes for omaps for v4.6 merge window. Mostly just
adding board specific devices and few new boards:
- N900 improvments for adp1653 and gpio keys
- Add missing bandgap data for omap3
- Add more devices for compulab cm-t335
- Add n950 WLAN support, enable modem, add pinctrl for SSI
- Correct dm814x and dra62x auxclk rate, add support for GPMC and NAND
- Add syscon node for PHY's on dra7
- Add support more devices on logicpd torpedo
- Add USB host support for igep and specify boot console
- Fix audio clock for am335x-sl50 and specify boot console
- Remove deprecated tx-fifo-resize for dwc3 that was only used on
omap5 es1.0
- Add dra7 thermal data
- Update am43x-epos-evm compatible string to am438
- Add support for logicpd dm3730 som-lv
----------------------------------------------------------------
Adam Ford (8):
ARM: dts: LogicPD Torpedo: Add MT9P031 Support
ARM: dts: LogicPD Torpedo: Add AT24 EEPROM Support
ARM: dts: LogicPD Torpedo: Fix Panel Sleep
ARM: dts: LogicPD Torpedo: Add SPI EEPROM
ARM: dts: LogicPD Torpedo: Set HSUSB0 Pin Mux
ARM: dts: omap3logic: Add PWM-Backlight
ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV
ARM: dts: Add HSUSB2 EHCI Support to Logic PD DM37xx SOM-LV
Enric Balletbo i Serra (3):
ARM: dts: igep00x0: Specify the device to be used for boot console output.
ARM: dts: am335x-sl50: Specify the device to be used for boot console output.
ARM: dts: am335x-sl50: Fix audio codec setup.
Felipe Balbi (1):
ARM: dts: remove deprecated property dwc3
Ivaylo Dimitrov (1):
ARM: dts: omap3-n900: Allow gpio keys to be disabled
Keerthy (4):
ARM: dts: DRA7: Add DSPEVE thermal data
ARM: dts: DRA7: Add IVA thermal data
ARM: dts: DRA7: Add missing IVA and DSPEVE thermal domain data
ARM: dts: am43x-epos-evm: Add the am438 compatible string
Kishon Vijay Abraham I (4):
ARM: dts: dra7: Add dt node for the sycon pcie
ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY node
ARM: dts: dra7: Use "ti,dra7x-usb2-phy2" compatible string for USB2 PHY2
ARM: dts: am4372/dra7/omap5: Use "syscon-phy-power" instead of "ctrl-module"
Nishanth Menon (1):
ARM: dts: am57xx-beagle-x15: Add eeprom information
Pali Roh?r (3):
ARM: dts: n900: Include adp1653 device
ARM: dts: omap3: Include missing bandgap data for ti-soc-thermal driver
ARM: dts: n900: Use linux input defines instead hardcoded constants
Pau Pajuel (1):
ARM: dts: omap3-igep0030-common: Add USB Host support
Sebastian Reichel (4):
ARM: dts: N950: Add wlan support
ARM: dts: OMAP3-N950-N9: Enable SSI module
ARM: dts: OMAP3-N950-N9: Enable modem
ARM: dts: OMAP3-N950-N9: Add ssi idle pinctrl state
Tony Lindgren (5):
ARM: dts: The rate for auxclk is 22.59792 by default
ARM: dts: Add support for GPMC for dm814x and dra62x
ARM: dts: Add NAND support for j5-eco evm
ARM: dts: Add NAND support for dm8148-evm
Merge branch 'n900-keys' into omap-for-v4.6/dt
Uri Mashiach (4):
ARM: dts: cm-t335: Add support for CAN bus
ARM: dts: cm-t335: add touchscreen support
ARM: dts: cm-t335: add audio support
ARM: dts: add spi wifi support to cm-t335
.../devicetree/bindings/arm/omap/omap.txt | 2 +-
arch/arm/boot/dts/am335x-cm-t335.dts | 171 +++++++++++++
arch/arm/boot/dts/am335x-sl50.dts | 24 +-
arch/arm/boot/dts/am4372.dtsi | 16 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
arch/arm/boot/dts/am57xx-beagle-x15.dts | 5 +
arch/arm/boot/dts/dm8148-evm.dts | 56 +++++
arch/arm/boot/dts/dm814x-clocks.dtsi | 4 +-
arch/arm/boot/dts/dm814x.dtsi | 12 +
arch/arm/boot/dts/dra62x-j5eco-evm.dts | 56 +++++
arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 27 +++
arch/arm/boot/dts/dra7-iva-thermal.dtsi | 27 +++
arch/arm/boot/dts/dra7.dtsi | 80 ++----
arch/arm/boot/dts/dra74x.dtsi | 1 -
arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 268 +++++++++++++++++++++
arch/arm/boot/dts/logicpd-som-lv.dtsi | 265 ++++++++++++++++++++
arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 163 ++++++++++---
arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 35 +++
arch/arm/boot/dts/omap3-igep.dtsi | 4 +
arch/arm/boot/dts/omap3-igep0030-common.dtsi | 41 ++++
arch/arm/boot/dts/omap3-n9.dts | 4 +
arch/arm/boot/dts/omap3-n900.dts | 44 ++--
arch/arm/boot/dts/omap3-n950-n9.dtsi | 93 +++++++
arch/arm/boot/dts/omap3-n950.dts | 33 +++
arch/arm/boot/dts/omap34xx.dtsi | 6 +
arch/arm/boot/dts/omap36xx.dtsi | 6 +
arch/arm/boot/dts/omap5.dtsi | 27 +--
27 files changed, 1324 insertions(+), 148 deletions(-)
create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
create mode 100644 arch/arm/boot/dts/dra7-iva-thermal.dtsi
create mode 100644 arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
create mode 100644 arch/arm/boot/dts/logicpd-som-lv.dtsi
next reply other threads:[~2016-02-22 21:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-22 21:56 Tony Lindgren [this message]
2016-02-26 21:35 ` [GIT PULL] omap device tree changes for v4.6 merge window, part 1 Arnd Bergmann
2016-02-26 21:58 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160222215612.GV13417@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).