[RESEND PATCH V7 4/6] i2c: qup: Add bam dma capabilities

[wsa@the-dreams.de (Wolfram Sang)]

On Mon, Feb 22, 2016 at 05:38:15PM +0530, Sricharan R wrote:
> QUP cores can be attached to a BAM module, which acts as
> a dma engine for the QUP core. When DMA with BAM is enabled,
> the BAM consumer pipe transmitted data is written to the
> output FIFO and the BAM producer pipe received data is read
> from the input FIFO.
> 
> With BAM capabilities, qup-i2c core can transfer more than
> 256 bytes, without a 'stop' which is not possible otherwise.
> 
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> Reviewed-by: Andy Gross <andy.gross@linaro.org>
> Tested-by: Archit Taneja <architt@codeaurora.org>
> Tested-by: Telkar Nagender <ntelkar@codeaurora.org>

Applied to for-next, thanks!

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160224/096b241c/attachment.sig>