linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC v2 07/12] PM / cpu_domains: Add PM Domain governor for CPUs
Date: Fri, 26 Feb 2016 11:33:38 -0800	[thread overview]
Message-ID: <20160226193338.GY28849@codeaurora.org> (raw)
In-Reply-To: <1455310238-8963-8-git-send-email-lina.iyer@linaro.org>

On 02/12, Lina Iyer wrote:
> @@ -52,6 +55,76 @@ struct cpu_pm_domain *to_cpu_pd(struct generic_pm_domain *d)
>  	return res;
>  }
>  
> +static bool cpu_pd_down_ok(struct dev_pm_domain *pd)
> +{
> +	struct generic_pm_domain *genpd = pd_to_genpd(pd);
> +	struct cpu_pm_domain *cpu_pd = to_cpu_pd(genpd);
> +	int qos = pm_qos_request(PM_QOS_CPU_DMA_LATENCY);
> +	u64 sleep_ns;
> +	ktime_t earliest, next_wakeup;
> +	int cpu;
> +	int i;
> +
> +	/* Reset the last set genpd state, default to index 0 */
> +	genpd->state_idx = 0;
> +
> +	/* We dont want to power down, if QoS is 0 */
> +	if (!qos)
> +		return false;
> +
> +	/*
> +	 * Find the sleep time for the cluster.
> +	 * The time between now and the first wake up of any CPU that
> +	 * are in this domain hierarchy is the time available for the
> +	 * domain to be idle.
> +	 */
> +	earliest = ktime_set(KTIME_SEC_MAX, 0);
> +	for_each_cpu_and(cpu, cpu_pd->cpus, cpu_online_mask) {

We're not worried about hotplug happening in parallel because
preemption is disabled here?

> +		next_wakeup = tick_nohz_get_next_wakeup(cpu);
> +		if (earliest.tv64 > next_wakeup.tv64)

	if (ktime_before(next_wakeup, earliest))

> +			earliest = next_wakeup;
> +	}
> +
> +	sleep_ns = ktime_to_ns(ktime_sub(earliest, ktime_get()));
> +	if (sleep_ns <= 0)
> +		return false;
> +
> +	/*
> +	 * Find the deepest sleep state that satisfies the residency
> +	 * requirement and the QoS constraint
> +	 */
> +	for (i = genpd->state_count - 1; i >= 0; i--) {
> +		u64 state_sleep_ns;
> +
> +		state_sleep_ns = genpd->states[i].power_off_latency_ns +
> +			genpd->states[i].power_on_latency_ns +
> +			genpd->states[i].residency_ns;
> +
> +		/*
> +		 * If we cant sleep to save power in the state, move on

s/cant/can't/

> +		 * to the next lower idle state.
> +		 */
> +		if (state_sleep_ns > sleep_ns)
> +			continue;
> +
> +		/*
> +		 * We also dont want to sleep more than we should to

s/dont/don't/

> +		 * gaurantee QoS.
> +		 */
> +		if (state_sleep_ns < (qos * NSEC_PER_USEC))

Maybe we should make qos into qos_ns? Presumably the compiler
would hoist out the multiplication here, but it doesn't hurt to
do it explicitly.

> +			break;
> +	}
> +
> +	if (i >= 0)
> +		genpd->state_idx = i;
> +
> +	return  (i >= 0) ? true : false;

Just return i >= 0?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2016-02-26 19:33 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-12 20:50 [RFC v2 00/12] PM: SoC idle support using PM domains Lina Iyer
2016-02-12 20:50 ` [RFC v2 01/12] PM / Domains: Abstract genpd locking Lina Iyer
2016-02-26 18:08   ` Stephen Boyd
2016-03-01 16:55     ` Lina Iyer
2016-02-12 20:50 ` [RFC v2 02/12] PM / Domains: Support IRQ safe PM domains Lina Iyer
2016-02-26 18:17   ` Stephen Boyd
2016-03-01 17:44     ` Lina Iyer
2016-02-12 20:50 ` [RFC v2 03/12] PM / cpu_domains: Setup PM domains for CPUs/clusters Lina Iyer
2016-02-17 23:38   ` Lina Iyer
2016-02-18 17:29   ` [BUG FIX] PM / cpu_domains: Check for NULL callbacks Lina Iyer
2016-02-18 17:46     ` Rafael J. Wysocki
2016-02-18 22:51       ` Lina Iyer
2016-02-26 19:10   ` [RFC v2 03/12] PM / cpu_domains: Setup PM domains for CPUs/clusters Stephen Boyd
2016-03-01 18:00     ` Lina Iyer
2016-02-12 20:50 ` [RFC v2 04/12] ARM: cpuidle: Add runtime PM support for CPUs Lina Iyer
2016-02-26 18:24   ` Stephen Boyd
2016-03-01 18:36     ` Lina Iyer
2016-02-12 20:50 ` [RFC v2 05/12] timer: Export next wake up of a CPU Lina Iyer
2016-02-12 20:50 ` [RFC v2 06/12] PM / cpu_domains: Record CPUs that are part of the domain Lina Iyer
2016-02-26 19:20   ` Stephen Boyd
2016-03-01 19:24     ` Lina Iyer
2016-02-12 20:50 ` [RFC v2 07/12] PM / cpu_domains: Add PM Domain governor for CPUs Lina Iyer
2016-02-26 19:33   ` Stephen Boyd [this message]
2016-03-01 19:32     ` Lina Iyer
2016-03-01 19:35       ` Stephen Boyd
2016-02-12 20:50 ` [RFC v2 08/12] Documentation / cpu_domains: Describe CPU PM domains setup and governor Lina Iyer
2016-02-26 19:43   ` Stephen Boyd
2016-03-01 19:36     ` Lina Iyer
2016-02-12 20:50 ` [RFC v2 09/12] drivers: firmware: psci: Allow OS Initiated suspend mode Lina Iyer
2016-02-12 20:50 ` [RFC v2 10/12] ARM64: psci: Support cluster idle states for OS-Initiated Lina Iyer
2016-02-12 20:50 ` [RFC v2 11/12] ARM64: dts: Add PSCI cpuidle support for MSM8916 Lina Iyer
2016-02-12 20:50 ` [RFC v2 12/12] ARM64: dts: Define CPU power domain " Lina Iyer
2016-02-26 19:50   ` Stephen Boyd
2016-03-01 19:41     ` Lina Iyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160226193338.GY28849@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).